ice tube clock voltage boost converter 0.6v

For RTC breakouts, etc., use the Other Products from Adafruit forum

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
mechbot
 
Posts: 9
Joined: Thu Oct 25, 2012 10:01 am

Re: ice tube clock voltage boost converter 0.6v

Post by mechbot »

when im backtracking in eagle i still come out that ive shorted vfd5 with vfd3

ive shorted 2 pins next to each other, so how can it be vfd7 if that one is 2 pins away from vfd5?

could you please supply me with a eagle board picture showing which 2 pins i need to connect, just like the picture i send a couple of post ago.

User avatar
adafruit_support_bill
 
Posts: 88041
Joined: Sat Feb 07, 2009 10:11 am

Re: ice tube clock voltage boost converter 0.6v

Post by adafruit_support_bill »

so how can it be vfd7 if that one is 2 pins away from vfd5?
Just going by what the display shows. It looks like you have identified the correct pins on the drawing. There is probably something loose or shorted inside the tube. Contact [email protected] with a link to this thread and as for a new IceTube display and side-board.

Locked
Please be positive and constructive with your questions and comments.

Return to “Clock Kits (discontinued)”