when im backtracking in eagle i still come out that ive shorted vfd5 with vfd3
ive shorted 2 pins next to each other, so how can it be vfd7 if that one is 2 pins away from vfd5?
could you please supply me with a eagle board picture showing which 2 pins i need to connect, just like the picture i send a couple of post ago.
ice tube clock voltage boost converter 0.6v
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
-
- Posts: 9
- Joined: Thu Oct 25, 2012 10:01 am
- adafruit_support_bill
- Posts: 88145
- Joined: Sat Feb 07, 2009 10:11 am
Re: ice tube clock voltage boost converter 0.6v
Just going by what the display shows. It looks like you have identified the correct pins on the drawing. There is probably something loose or shorted inside the tube. Contact [email protected] with a link to this thread and as for a new IceTube display and side-board.so how can it be vfd7 if that one is 2 pins away from vfd5?
Please be positive and constructive with your questions and comments.