SOLD: Manncorp T200C+ Reflow Oven for sale

Chat about pick and place machines, reflow ovens, assembly techniques and other SMT tips & trix

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
bmw330i
 
Posts: 51
Joined: Mon May 07, 2012 9:59 pm

SOLD: Manncorp T200C+ Reflow Oven for sale

Post by bmw330i »

Purchased this from someone on the list here (http://forums.adafruit.com/viewtopic.php?f=42&t=28291).
SOLD, SOLD, SOLD...

Here's a link to the Torch website: http://www.torchsmt.com/html-en/product ... 0C%2B.html

It has worked very well for me. It was my first reflow oven and I learned a lot about reflow with it. I will include the serial to USB cable as well (see photo). Using the cable and torch software it was very easy to adjust the reflow curves very precisely.

Condition: Only used a few times by me since I am a very small shop. I am selling it because I can't power it from my new location (30A / 220v) so I had to get a smaller 115v oven which I use.

Attached are two photos taken recently. It has sat idle since moving to my new location in northern california.

All reasonable offers considered since it really needs a new home and to get to work. Manncorp sold it for 4k. Torch sells them for 2800. Make an offer I'm not going to be greedy with it.

Shipping will be a challenge as it's heavy. It came on a pallet to me from the prior owner but could likely be boxed well and shipped that way.
Attachments
T200C+_Reflow01.JPG
T200C+_Reflow01.JPG (566.06 KiB) Viewed 3032 times
Last edited by bmw330i on Tue Feb 18, 2014 11:46 pm, edited 1 time in total.

ltest10
 
Posts: 5
Joined: Sun Dec 15, 2013 5:53 pm

Re: Manncorp T200C+ Reflow Oven for sale

Post by ltest10 »

I am interested, don't know how to post private message. Thanks.

bmw330i
 
Posts: 51
Joined: Mon May 07, 2012 9:59 pm

Re: Manncorp T200C+ Reflow Oven for sale

Post by bmw330i »

Hello, I believe there is some rule in the forum software that requires several posts before you can send a PM.

ltest10
 
Posts: 5
Joined: Sun Dec 15, 2013 5:53 pm

Re: Manncorp T200C+ Reflow Oven for sale

Post by ltest10 »

Hi. can you contact me on e-bay (ltest10)? you can use any item i have
on sale to contact me. i usually don't post on this site. thanks.

ltest10
 
Posts: 5
Joined: Sun Dec 15, 2013 5:53 pm

Re: Manncorp T200C+ Reflow Oven for sale

Post by ltest10 »

please contact me on e-bay or send me private message with your contact info.
i can't post e-mail on this forum. it appears that private messaging is disabled for this board.
--------------------------------------
I cannot send private messages!
There are three reasons for this; you are not registered and/or not logged on, the board administrator has disabled private messaging for the entire board, or the board administrator has prevented you from sending messages. Contact a board administrator for more information.
--------------------------------------

ltest10
 
Posts: 5
Joined: Sun Dec 15, 2013 5:53 pm

Re: Manncorp T200C+ Reflow Oven for sale

Post by ltest10 »

please e-mail me at: --at--.net . Thanks.
Last edited by ltest10 on Thu Dec 19, 2013 2:39 am, edited 1 time in total.

bmw330i
 
Posts: 51
Joined: Mon May 07, 2012 9:59 pm

Re: Manncorp T200C+ Reflow Oven for sale

Post by bmw330i »

Ok, will try at that address.

bmw330i
 
Posts: 51
Joined: Mon May 07, 2012 9:59 pm

Re: SOLD: Manncorp T200C+ Reflow Oven for sale

Post by bmw330i »

SOLD: Went to a good home in Dec. Forgot to update this.

Locked
Please be positive and constructive with your questions and comments.

Return to “SMT (Surface Mount Tech)”