Hey guys!
I got my bundle of goodies the other day, and fired up the 220x microscope to do some SMD stuff.
https://www.adafruit.com/product/636
While I played with it for the first little bit (on Ubuntu using Cheese - thanks David!) - I was very happy with it. I disconnected the microscope to do some other things.
Then a little later, I plugged it in and tried again. This time, nothing - no image, and Cheese complained that there were no usb devices it could use.
I moved over to a Windows machine, and tried the software that came with the microscope. I installed all the drivers and the software. The software started, but complained that the camera needed to be connected (it was already plugged in, and I verified the drivers were installed in the Device Manager).
So, I found the latest software on the Adafruit site and downloaded it. I installed the drivers and the software, and got nothing but a grey screen in the software.
Any help would be appreciated.
Thanks
5MP interpolated 220x microscope - Not Working
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
-
- Posts: 1
- Joined: Wed Sep 24, 2014 10:00 pm
- adafruit_support_rick
- Posts: 35092
- Joined: Tue Mar 15, 2011 11:42 am
Re: 5MP interpolated 220x microscope - Not Working
Please email [email protected] with a link to this thread for a replacement microscope!
Please be positive and constructive with your questions and comments.