Does anyone know where I can buy replacement silicone tubing for the SS-02 Solder Sucker?
I lost the little replacement it came with. I've tried finding similar tubing (2mm ID x 1mm wall) and haven't found anything available in the US.
Thanks for any help!
SS-02 Solder Sucker tubing
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit_support_bill
- Posts: 88086
- Joined: Sat Feb 07, 2009 10:11 am
Re: SS-02 Solder Sucker tubing
The diameter is not super-critical. 3/32 ID x 1/32 or 1/16 wall silicone tubing is available by the foot from suppliers like McMaster Carr or US Plastics.
- geckopj
- Posts: 2
- Joined: Mon Feb 09, 2015 5:35 pm
Re: SS-02 Solder Sucker tubing
Thanks for your reply!!
Would something like this work?
The US Plastics site does sell by the foot, but it has to be a minimum of 10 ft plus 17$ for just shipping. Didn't see anything comparable on the McMaster-Carr site either.
Thanks!
Would something like this work?
The US Plastics site does sell by the foot, but it has to be a minimum of 10 ft plus 17$ for just shipping. Didn't see anything comparable on the McMaster-Carr site either.
Thanks!
- adafruit_support_bill
- Posts: 88086
- Joined: Sat Feb 07, 2009 10:11 am
Re: SS-02 Solder Sucker tubing
That should do it.Would something like this work?
That's good to know. I usually by 50-100 ft at a time, so I wasn't aware of the minimum.The US Plastics site does sell by the foot, but it has to be a minimum of 10 ft plus 17$ for just shipping.
Please be positive and constructive with your questions and comments.