Wire Light LED Strand ID:893
Moderators: adafruit_support_bill, adafruit

Wire Light LED Strand ID:893

by JimG on Tue Nov 20, 2012 3:45 pm

I'd like to use 6 -> 8 of these to light up a small artificial Christmas tree but I don't want to have to deal with all those coin cell holders. I'd like to power these from one power supply or battery pack. I understand I'd have to add some resistance based in the voltage selected. I'd like to run the power up the trunk and solder the individual branch pieces onto this

Are the LED's wired in parallel between the two wires or in series along the wires?

I'd like to shorten/lengthen the strands to fit along the branches. Is it OK to cut some off of one strand and solder it to another?
Posts: 11
Joined: Mon Feb 14, 2011 4:53 pm

Re: Wire Light LED Strand ID:893

by adafruit on Wed Nov 21, 2012 11:45 am

you can parallel them all together, thats what we suggest, and power from a 5V DC supply - a 5V 2A would light many!

Posts: 11907
Joined: Thu Apr 06, 2006 4:21 pm
Location: nyc