I purchased Beaglebone black rev C.
I wanted it to boot off sdcard and disable other boot modes and
I had done the following on another beagle bone black and it worked fine before.
I plugged it on a windows pc with USB let it show up as usb drive.
1. rename MLO to MLO_RENAMED.
2.Unplug USB, Plug in power from front power jack. and let boot off emmc without sdcard plugged and go into
/media/boot/ and rename that MLO.
3. plug in sdcard and then i could always reliably boot of sdcard.
This time I just did the same with my new out of the box beaglebone and after I was done with USB MLO rename(step 1 above) I could not boot from emmc. IT will not boot off sdcard either.
The power LED comes on and that is it....
Can some one help me get this thing booting in any mode.....
Thanks
Beaglebone black does not boot on sdcard or off emmc
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- mnew
- Posts: 2
- Joined: Wed Dec 05, 2012 2:35 pm
- adafruit_support_rick
- Posts: 35092
- Joined: Tue Mar 15, 2011 11:42 am
Re: Beaglebone black does not boot on sdcard or off emmc
CircuitCo, the manufacturer, has asked that we refer all RMA requests to their site:
http://beagleboard.org/support/rma
http://beagleboard.org/support/rma
Please be positive and constructive with your questions and comments.