Hello Adafruit!
I am interested in creating a wireless ssh link from my windows PC to my beaglebone black. Any thoughts on how this might be done? I've come up with a possible solution using two XBee modules of which I've attached a diagram. Another possible solution might be to use the bluefruit breakout board found here https://www.adafruit.com/products/1588.
In either case, I'm looking to make a connection that will appear as a simple COM port on either side. I understand that this wouldn't have the full capabilities of a USB connection, but since my SSH link will be limited to 115200 baud anyway I figure this won't be a problem.
Any help would be greatly appreciated!
Wireless ssh link to BBB
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- Dryberg
- Posts: 2
- Joined: Tue Apr 22, 2014 4:40 pm
Wireless ssh link to BBB
- Attachments
-
- Project Diagram.png (141.09 KiB) Viewed 298 times
- adafruit_support_mike
- Posts: 67454
- Joined: Thu Feb 11, 2010 2:51 pm
Re: Wireless ssh link to BBB
You could use XBees as you've shown, but it would probably be easier to plug in a USB wifi dongle. That's how I do it.
Please be positive and constructive with your questions and comments.