Memorial day is 05/25/2015 – Orders will ship out on May 26th. There will not be any deliveries or shipping on Monday. Any order placed after 11am ET on Friday May 22nd will not start to ship out until Tuesday May 26th.

1-wire not working
Moderators: adafruit_support_bill, adafruit

Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/

1-wire not working

by mapet on Wed Aug 08, 2012 5:17 pm

Hi, I'm don't now Raspberry pi and Linux enought yet.
1-wire communication is not working to me, and I don't know why.
Under Raspbian with Frank Buss kernel everything works fine (temperature sensor DS18B20), but if I try Adafruit's Occidentalis image, then it's not working and I really don't know where is the problem.


http://postimage.org/image/ljtwcmtqv/
mapet
 
Posts: 3
Joined: Wed Aug 08, 2012 5:11 pm

Re: 1-wire not working

by adafruit on Wed Aug 08, 2012 7:04 pm

it absolutely works, its something with your wiring, power, sensor, etc.

adafruit
 
Posts: 11904
Joined: Thu Apr 06, 2006 4:21 pm
Location: nyc

Re: 1-wire not working

by mapet on Thu Aug 09, 2012 5:26 am

Like I seid, under Raspbian withe modified kernel everythnigk works fine, with connected 2 DS18B20

http://postimage.org/image/roar1gy6l/

Under Adafruit, there is problem somewhere and I really don't know where.

http://postimage.org/image/sxyx5nw9t/
mapet
 
Posts: 3
Joined: Wed Aug 08, 2012 5:11 pm

Re: 1-wire not working

by pgrunwald on Thu Aug 09, 2012 3:26 pm

Are you using GPIO #4 (PIN07)?

pgrunwald
 
Posts: 33
Joined: Tue Jul 14, 2009 10:32 pm

Re: 1-wire not working

by mapet on Thu Aug 09, 2012 4:06 pm

data: GPIO4, pin7
Vcc: 3V3
gnd: gnd

+ 4k7Ω between data and Vcc

DS18B20 waterproof performance with about 1m long cable from ebay

I have just "install" OS on the card, using Win32diskmanager, connect from Windows via Putty SSH client and it don't want to work.
I have checked image MD5 and it was fine.
mapet
 
Posts: 3
Joined: Wed Aug 08, 2012 5:11 pm