i2c 16x2 rgb lcd pi plate no backlight

Moderators: adafruit_support_bill, adafruit

Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
Locked
superdave
 
Posts: 2
Joined: Wed Dec 12, 2012 9:18 pm

i2c 16x2 rgb lcd pi plate no backlight

Post by superdave »

I just put together the i2c pi plate and 16x2 blue/white character lcd, and I'm getting no backlight. I have checked ALL my solder connections, and my Pi will light an LED with 5v. I can see the boxes on the first row because I haven't served it anything to display yet, and I can adjust the contrast, but the backlight fails to light. Is there something i'm missing?

Thanks,
Dave

superdave
 
Posts: 2
Joined: Wed Dec 12, 2012 9:18 pm

Re: i2c 16x2 rgb lcd pi plate no backlight

Post by superdave »

Come to think of it, I don't think this Pi Plate was made for the non RGB version of the character display. It's not working for me AT ALL. I followed the tutorial to the letter, but I could not get the thing to work in any sense of the word.

User avatar
adafruit_support_bill
 
Posts: 88041
Joined: Sat Feb 07, 2009 10:11 am

Re: i2c 16x2 rgb lcd pi plate no backlight

Post by adafruit_support_bill »

Post photos of the front & back of the board. The difference between the RGB and the blue/white display is the extra two pins for the Blue & Green backlight leds. For the Blue/White (and all other monochrome backlight) displays, the backlight is controlled by the "Red" pin. All other pin connections are the same.

Locked
Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/

Return to “Adafruit Raspberry Pi® accessories”