I received my display and connected it to one of my Pi's. Which worked fine. So I started checking out what settings were available in the display. I accidentally switched the system? that the display is using. I think. Now all I can get is a gray screen. Anybody know how to switch it back? The Pi is still running because I can ssh into that.
Thanks
HDMI 4 pi display
Moderators: adafruit_support_bill, adafruit
Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
-
adafruit_support_rick
- Posts: 35092
- Joined: Tue Mar 15, 2011 11:42 am
Re: HDMI 4 pi display
Which HDMI 4 Pi display do you have? We have several different products by that name. If you can pot a link to the product page, that would be great.
Have you tried rebooting the Pi?
Have you tried rebooting the Pi?
-
gohsthb
- Posts: 12
- Joined: Mon Jul 21, 2014 8:00 pm
-
adafruit_support_rick
- Posts: 35092
- Joined: Tue Mar 15, 2011 11:42 am
Re: HDMI 4 pi display
Try rebooting the Pi
Try a different HDMI cable
Try connecting to a different HDMI source.
Do any of the buttons do anything?
Check that all of the wires are intact and solidly connected
Try a different HDMI cable
Try connecting to a different HDMI source.
Do any of the buttons do anything?
Check that all of the wires are intact and solidly connected
Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/