I am using a pi to display an image for a robot and I need to power these Led Matrix.
What is the best way to do this Via DC
Powering 2 Medium 16x32 RGB LED matrix panel
Moderators: adafruit_support_bill, adafruit
Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
- laxstar16
- Posts: 7
- Joined: Sun Jun 23, 2013 12:31 am
- adafruit_support_mike
- Posts: 67485
- Joined: Thu Feb 11, 2010 2:51 pm
Re: Powering 2 Medium 16x32 RGB LED matrix panel
You'll need a 2A @ 5v power source for each panel.
This tutorial shows how to make the connections: https://learn.adafruit.com/connecting-a ... i/overview
This tutorial shows how to make the connections: https://learn.adafruit.com/connecting-a ... i/overview
Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/