Hello everyone!
We are creating a Photo Booth using these instructions from LifeHacker. We purchased this 7" TFT-LCD monitor which is mentioned as an option in the project. We have not been able to get a signal from the Raspberry Pi (model B). The SD card has been formatted and we have installed Raspbian using an HDMI cable with a different external monitor. We also set up the system to boot to the GUI. When we attach the 7" monitor via VGA, all we get is a blue screen with the message "NO SIGNAL" on both AV1 and AV2 channels. I will attach a picture of our setup to give you an idea of what we have going on. Any help would be much appreciated!
https://drive.google.com/file/d/0B7qEcD ... sp=sharing
7" TFT-LCD Monitor w/ Raspberry Pi
Moderators: adafruit_support_bill, adafruit
Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
- A_Fouache
- Posts: 2
- Joined: Thu Oct 30, 2014 7:48 pm
Re: 7" TFT-LCD Monitor w/ Raspberry Pi
Hey !
Just passing by ...
Here's a few leads for you :
- http://elinux.org/R-Pi_Troubleshooting# ... s_no_image
- http://elinux.org/RPiconfig#Video
Cool project !
Just passing by ...
Here's a few leads for you :
- http://elinux.org/R-Pi_Troubleshooting# ... s_no_image
- http://elinux.org/RPiconfig#Video
Cool project !
- Heidecker
- Posts: 2
- Joined: Thu Oct 30, 2014 2:56 pm
Re: 7" TFT-LCD Monitor w/ Raspberry Pi
Hey!
Sorry for the month late response! We ended up solving the problem by holding shift while booting to boot into install mode. You can then switch displays by pressing 1-4 on your keyboard. Thanks for the help!
Sorry for the month late response! We ended up solving the problem by holding shift while booting to boot into install mode. You can then switch displays by pressing 1-4 on your keyboard. Thanks for the help!
Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/