knock knock ... error etc etc ...
retry and again the stop loading ...
my xox is frozen... every func dont start!
BANNED
Moderators: altitude, adafruit_support_bill, adafruit, phono, hamburgers
Please be positive and constructive with your questions and comments.
-
- Posts: 21
- Joined: Thu May 30, 2013 5:32 pm
Re: BANNED
I follow the test guide... in all section ... and finally my xox doesnt work ...
please help me!
I hope in your helpfull
please help me!
I hope in your helpfull
-
- Posts: 21
- Joined: Thu May 30, 2013 5:32 pm
Re: BANNED
pc said me: ARE YOU SURE IN BOOTLOAD MODE?
yes i'm in bootload ...
yes i'm in bootload ...
- antto
- Posts: 1636
- Joined: Thu Apr 15, 2010 3:21 pm
Re: BANNED
okay, to clear things up
- at first, your x0xb0x was working in all modes (pattern play, random mode, pattern edit, etc..)
- then you ran BANNED and tried to update the OS - what did BANNED do exactly?
- at first, your x0xb0x was working in all modes (pattern play, random mode, pattern edit, etc..)
- then you ran BANNED and tried to update the OS - what did BANNED do exactly?
-
- Posts: 21
- Joined: Thu May 30, 2013 5:32 pm
Re: BANNED
is possible make a video of this situation???
- antto
- Posts: 1636
- Joined: Thu Apr 15, 2010 3:21 pm
Re: BANNED
this video demonstrates the main things you need to know:
http://www.youtube.com/watch?v=9LuWMUQQ750
http://www.youtube.com/watch?v=9LuWMUQQ750
-
- Posts: 21
- Joined: Thu May 30, 2013 5:32 pm
Re: BANNED
ok...!
soon I make a video for my situation ...
soon I make a video for my situation ...
-
- Posts: 21
- Joined: Thu May 30, 2013 5:32 pm
Re: BANNED
i've try and retry but nothing... conbox tell me: KNOCK KNOCK ETC ETC ERROR ...
I watch and follow the video guide on youtube but this insnt my problem ...
my xox not respond!! in every funcs ... it doesnt play !!!!
please help me to go out of this fu******* situation !!!!
I want start from zero...
I watch and follow the video guide on youtube but this insnt my problem ...
my xox not respond!! in every funcs ... it doesnt play !!!!
please help me to go out of this fu******* situation !!!!
I want start from zero...
- antto
- Posts: 1636
- Joined: Thu Apr 15, 2010 3:21 pm
Re: BANNED
probably the bootloader has gotten corrupted
-
- Posts: 21
- Joined: Thu May 30, 2013 5:32 pm
Re: BANNED
What should I do?
show me the procedure starting from zero.
I have a W7.
thanks
show me the procedure starting from zero.
I have a W7.
thanks
- antto
- Posts: 1636
- Joined: Thu Apr 15, 2010 3:21 pm
Re: BANNED
well, the procedure..
first you have to install the USB<->Serial drivers from FTDI, this is for the x0xb0x to be recognized as a "Serial port" device in the OS
then, you plug the x0xb0x via USB and it should be recognized
then, run BANNED and configure the port name to match the port name of this new serial port
from that point, it should work
i've written these instructions in the BANNED readme file too iirc
but if your cpu has gone corrupted (i'm not 100% sure, but that's how it looks) you can do 2 things:
1) use a "programmer" device to erase the chip and program the bootloader again
2) buy a new cpu which is pre-flashed with the bootloader
first you have to install the USB<->Serial drivers from FTDI, this is for the x0xb0x to be recognized as a "Serial port" device in the OS
then, you plug the x0xb0x via USB and it should be recognized
then, run BANNED and configure the port name to match the port name of this new serial port
from that point, it should work
i've written these instructions in the BANNED readme file too iirc
but if your cpu has gone corrupted (i'm not 100% sure, but that's how it looks) you can do 2 things:
1) use a "programmer" device to erase the chip and program the bootloader again
2) buy a new cpu which is pre-flashed with the bootloader
-
- Posts: 21
- Joined: Thu May 30, 2013 5:32 pm
Re: BANNED
i've retry....
the xox is connect to conbox
opening serial port \\.\com3 @ 19200
success
firmware version...
unknown FW
v1.05
detecting pattern size...
and now i'm inside the editor...
the port is okay and all trasmission...
but my xox is frozen!!!... wtf
the xox is connect to conbox
opening serial port \\.\com3 @ 19200
success
firmware version...
unknown FW
v1.05
detecting pattern size...
and now i'm inside the editor...
the port is okay and all trasmission...
but my xox is frozen!!!... wtf
-
- Posts: 21
- Joined: Thu May 30, 2013 5:32 pm
Re: BANNED
and now i've try to go: upload firmware
... when i click on the file .hex the conbox said me:
knock knock ... the deviceID string etc etc
what is this?
... when i click on the file .hex the conbox said me:
knock knock ... the deviceID string etc etc
what is this?
- antto
- Posts: 1636
- Joined: Thu Apr 15, 2010 3:21 pm
Re: BANNED
if it says that it can't get the DeviceID string - that probably means that there's no reply from the bootloader
this can happen if the x0x is running the firmware, or if there's no bootloader at all
"(auto) unknown FW" <- this means that BANNED failed to autodetect the firmware, which can happen if you are skipping the normal procedures, which happens when the x0x doesn't reply in any of the expected ways (or doesn't reply at all)
this can happen if the x0x is running the firmware, or if there's no bootloader at all
"(auto) unknown FW" <- this means that BANNED failed to autodetect the firmware, which can happen if you are skipping the normal procedures, which happens when the x0x doesn't reply in any of the expected ways (or doesn't reply at all)
-
- Posts: 21
- Joined: Thu May 30, 2013 5:32 pm
Re: BANNED
and then how do you solve this situation?
I do not understand anything ...
I need specific files? software? Drivers?
link they please
I do not understand anything ...
I need specific files? software? Drivers?
link they please
Please be positive and constructive with your questions and comments.