I'm not lucky today.
Firmware won't load. ... Same as gompie i guess
Order a programmed cpu or, finf someone who can load the boot thingy
BANNED
Moderators: altitude, adafruit_support_bill, adafruit, phono, hamburgers
Please be positive and constructive with your questions and comments.
- antto
- Posts: 1636
- Joined: Thu Apr 15, 2010 3:21 pm
Re: BANNED
in gompie's case, he does have firmware (and i think bootloader too) but the data from the x0x over the serial port somehow turns into zero bytes, we suspect something might be wrong with the USB chip or the connections around it
-
- Posts: 110
- Joined: Sun May 13, 2012 8:35 pm
Re: BANNED
Ok, just found out al(14) of the 2.2k's are 22k's .antto wrote:in gompie's case, he does have firmware (and i think bootloader too) but the data from the x0x over the serial port somehow turns into zero bytes, we suspect something might be wrong with the USB chip or the connections around it
Maybe it will help changing them
-
- Posts: 28
- Joined: Mon May 28, 2012 2:07 pm
Re: BANNED
Correct. I've orderd a new USB chip (FT232BL, replacement for FT232BM, similar pin-out but lead free). I hope FedEx will reach my door on friday, so I can check during this weekend if this was the issue all along.antto wrote:in gompie's case, he does have firmware (and i think bootloader too) but the data from the x0x over the serial port somehow turns into zero bytes, we suspect something might be wrong with the USB chip or the connections around it
I have provided Evo with a link to the altered BANNED executable you compiled, to check the output on his USB connection, I hope you're ok with that. To me it was a great help to have some more information about what is actually going on. Otherwise with so many variables its very hard to isolate the problem, and its very easy to make a lot of assumpions.
-
- Posts: 110
- Joined: Sun May 13, 2012 8:35 pm
Re: BANNED
Coolantto wrote:no problem
I got the data, but i cant understand. Lots of zero's though
- antto
- Posts: 1636
- Joined: Thu Apr 15, 2010 3:21 pm
Re: BANNED
paste the log file contents on something like BANNED.com and post the link
-
- Posts: 110
- Joined: Sun May 13, 2012 8:35 pm
Re: BANNED
here it is:antto wrote:paste the log file contents on something like BANNED.com and post the link
http://BANNED.com/6GcZCZFq
I found someone who can put the bootloader and firmware on my CPU. But now I only need the bootloader file. Can someone help me out ? cant find it... only pages full of code
- antto
- Posts: 1636
- Joined: Thu Apr 15, 2010 3:21 pm
Re: BANNED
the bootloader .hex is here: http://x0xb0x.cvs.sourceforge.net/viewv ... ootloader/
there's also the "x0xb0x_full.hex" which i guess is the firmware + bootloader
as for the log, i there is only out-going data, and no reply from the x0x, so it appears as if nothing is on the other side
there's also the "x0xb0x_full.hex" which i guess is the firmware + bootloader
as for the log, i there is only out-going data, and no reply from the x0x, so it appears as if nothing is on the other side
-
- Posts: 110
- Joined: Sun May 13, 2012 8:35 pm
Re: BANNED
Thanks!antto wrote:the bootloader .hex is here: http://x0xb0x.cvs.sourceforge.net/viewv ... ootloader/
there's also the "x0xb0x_full.hex" which i guess is the firmware + bootloader
as for the log, i there is only out-going data, and no reply from the x0x, so it appears as if nothing is on the other side
Nothing on the other side? Like no software,or no usb port?
- antto
- Posts: 1636
- Joined: Thu Apr 15, 2010 3:21 pm
Re: BANNED
since you connected to the serial port, then the usb-serial driver is working
it's the x0x that doesn't respond, so yeah there isn't any firmware and/or bootloader on it
it's the x0x that doesn't respond, so yeah there isn't any firmware and/or bootloader on it
-
- Posts: 110
- Joined: Sun May 13, 2012 8:35 pm
Re: BANNED
Ok thats good news for me. Tomorrow ill meet someone who will put the bootloader and firmware onantto wrote:since you connected to the serial port, then the usb-serial driver is working
it's the x0x that doesn't respond, so yeah there isn't any firmware and/or bootloader on it
-
- Posts: 28
- Joined: Mon May 28, 2012 2:07 pm
Re: BANNED
IT NOW WORKS!! So glad the USB chip was the issue. In the kit I received to build the x0xb0x the IO-board came with the USB chip already on there. In the end it did not save me much time, because it was BROKEN!
So, put a new USB chip on there today and OMG: BANNED works as promised and I've been able to put sokkOS 2.0 on there in one run! Thanks for the program and all the help you guys!
So, put a new USB chip on there today and OMG: BANNED works as promised and I've been able to put sokkOS 2.0 on there in one run! Thanks for the program and all the help you guys!
-
- Posts: 110
- Joined: Sun May 13, 2012 8:35 pm
Re: BANNED
That's great news! Enjoy itgompie wrote:IT NOW WORKS!! So glad the USB chip was the issue. In the kit I received to build the x0xb0x the IO-board came with the USB chip already on there. In the end it did not save me much time, because it was BROKEN!
So, put a new USB chip on there today and OMG: BANNED works as promised and I've been able to put sokkOS 2.0 on there in one run! Thanks for the program and all the help you guys!
Please be positive and constructive with your questions and comments.