Hello , i have a problem with my xoxbox . I bought my xoxbox on internet , she is an opportunity. I can't save my patterns and a friend said to me that it was perhaps the "eeprom" which was absent in the machine. The place where the eeprom should be is empty but there is another flea . I dont know what it is . Have to I buy one others eeprom ? Or others things to do ?
Thank you for your help and verry sorry for my english !
eeprom xoxbox v 1.5
Moderators: altitude, adafruit_support_bill, adafruit, phono, hamburgers
Please be positive and constructive with your questions and comments.
- rv0
- Posts: 395
- Joined: Tue Jul 14, 2009 4:50 pm
Re: eeprom xoxbox v 1.5
can you post a picture of the pcb? (insides of the x0x)
- mmm
- Posts: 517
- Joined: Tue Apr 24, 2012 1:51 am
Re: eeprom xoxbox v 1.5
The chip is there; it's the small SMD chip next to the empty position.
-
- Posts: 5
- Joined: Sun Jan 20, 2013 3:54 pm
Re: eeprom xoxbox v 1.5
ok , but if i have a cheap . What's the problem ? I can't save my patterns and i don't know why . Do you have have any ideas for change this problem ?
Thank you
Thank you
- antto
- Posts: 1636
- Joined: Thu Apr 15, 2010 3:21 pm
Re: eeprom xoxbox v 1.5
i think you have to press DONE at the last step of the pattern to save it to the eeprom
-
- Posts: 5
- Joined: Sun Jan 20, 2013 3:54 pm
Re: eeprom xoxbox v 1.5
I'have already make this manipulation but when i change my module my patterns are erased . I dont' know what ?
- mmm
- Posts: 517
- Joined: Tue Apr 24, 2012 1:51 am
Re: eeprom xoxbox v 1.5
There's the possibility that the chip is defective.
Where are you located?
Where are you located?
-
- Posts: 5
- Joined: Sun Jan 20, 2013 3:54 pm
Re: eeprom xoxbox v 1.5
I'm from France , i live in Cannes .
- mmm
- Posts: 517
- Joined: Tue Apr 24, 2012 1:51 am
Re: eeprom xoxbox v 1.5
If you'd be willing to send the xoxbox to Germany I could fix it. If the EEprom is defective I would instead install the standard DIP EEprom.
I've been doing part of the service work for Mode Machines since last year and have fixed about 60 to 70 xoxboxes.
I've been doing part of the service work for Mode Machines since last year and have fixed about 60 to 70 xoxboxes.
Please be positive and constructive with your questions and comments.