Hi to all,
I bought a Xoxbox (adafruit v1.5 stamped in PCB) I think there were problems during transport.
There are some issues about leds functionality: Tempo led, 1-2 Sequencer leds, Next and Done leds, randomly remain fix, switch on or work for few time.
Audio section and all funtions are 100% working.
Anyone can tell me how and what to check ?
What's happened with my Xoxbox ?
I've uploaded a video: http://youtu.be/M3roJD-Vclc
TNX in advance
Cheers
Xoxbox issues (video)
Moderators: altitude, adafruit_support_bill, adafruit, phono, hamburgers
Please be positive and constructive with your questions and comments.
- antto
- Posts: 1636
- Joined: Thu Apr 15, 2010 3:21 pm
Re: Xoxbox issues (video)
when you set it to Keyboard mode, try turning the BANK knob all the way, and see if the bank LEDs display that properly from 1 to 16
- tek303
- Posts: 7
- Joined: Tue Mar 17, 2015 5:48 pm
Re: Xoxbox issues (video)
No antto, 1 And 2, and other leds mentioned dont work. Same Thing About other modes. But ... sometimes xoxbox works fine only for few minutes.
- Nordcore
- Posts: 99
- Joined: Sat May 23, 2015 3:14 pm
Re: Xoxbox issues (video)
The most probable DIY problem is bad solder joints.
LEDs:
TEMPO, Bank (=1...16 Row) 1 + 2, NEXT, DONE, PREV, Key C (#1), RUN/STOP, CHAIN
are from IC4.
So have a look if there is a pin ( ... 8 or 16 would come in mind ... ) not soldered at all.
LEDs:
TEMPO, Bank (=1...16 Row) 1 + 2, NEXT, DONE, PREV, Key C (#1), RUN/STOP, CHAIN
are from IC4.
So have a look if there is a pin ( ... 8 or 16 would come in mind ... ) not soldered at all.
- tek303
- Posts: 7
- Joined: Tue Mar 17, 2015 5:48 pm
Re: Xoxbox issues (video)
Really thanx My Friend. I know what to Check Now ;-)
Please be positive and constructive with your questions and comments.