How/where to connect power to #946 (4.3" TFT Display)
Moderators: adafruit_support_bill, adafruit

How/where to connect power to #946 (4.3" TFT Display)

by pra on Wed Nov 21, 2012 5:42 pm

The unit comes with the audio/video plugs attached and a power jack and cable with bare wires at end to obviously attach to the display. For the life of me, can't see anywhere to attach these wires . Help!
pra
 
Posts: 9
Joined: Wed Nov 21, 2012 5:37 pm

Re: How/where to connect power to #946 (4.3" TFT Display)

by adafruit on Wed Nov 21, 2012 7:42 pm

you can plug a 12V power supply such as this one right in, remove the extra cable with wire ends
http://adafruit.com/products/798
User avatar
adafruit
 
Posts: 11707
Joined: Thu Apr 06, 2006 4:21 pm
Location: nyc

Re: How/where to connect power to #946 (4.3" TFT Display)

by pra on Wed Nov 21, 2012 11:19 pm

Plug it in where though, there is no power jack on the display
pra
 
Posts: 9
Joined: Wed Nov 21, 2012 5:37 pm

Re: How/where to connect power to #946 (4.3" TFT Display)

by pra on Thu Nov 22, 2012 12:18 am

Ahh, I thought the red and white connectors were the audio jacks, the yellow being the video. Turns out the white is audio and red is power!
pra
 
Posts: 9
Joined: Wed Nov 21, 2012 5:37 pm



cron