nRF24L01+ module on Arduino shield
Moderators: adafruit_support_bill, adafruit

nRF24L01+ module on Arduino shield

by PC-Man on Fri Feb 15, 2013 5:30 pm


I made some Arduino shields for nRF24L01+ modules and I have interesting problem:

If I have modules directly connected to the shield (pinhead on module to socket on shield), there is high packet loss (about 20-30%) when sending data to another nRF module. But, if I touch the module antenna by my hand OR modules are connected to this shield by wires (cca 10cm), all works ok.

I use these nRF modules:


Any idea what can cause this problem?
Posts: 1
Joined: Fri Feb 15, 2013 5:25 pm

Re: nRF24L01+ module on Arduino shield

by adafruit_support_bill on Sat Feb 16, 2013 7:31 am

We don't carry these modules and are not familiar with their operating characteristics. The seller should be able to answer your technical questions.
Since this is not an Arduino-specific question, I am moving this topic to "General Project Help"
User avatar
Posts: 31041
Joined: Sat Feb 07, 2009 10:11 am