connection of thermoelectric modules
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- xrikar
- Posts: 1
- Joined: Mon Feb 08, 2016 11:52 am
connection of thermoelectric modules
I have bought 3 of these https://www.adafruit.com/products/1335 and this https://www.adafruit.com/products/352. How do I connect them all together to the power supply, is it possible? If not, how can I connect just one thermoelectric module to the power supply?
- adafruit_support_bill
- Posts: 88087
- Joined: Sat Feb 07, 2009 10:11 am
Re: connection of thermoelectric modules
One module will require the full 5A capacity of the power supply. So only connect one at a time.
The two red wires should go to +12v and the two black wires to ground. The easiest way is to use an adapter like this:
https://www.adafruit.com/products/368
The two red wires should go to +12v and the two black wires to ground. The easiest way is to use an adapter like this:
https://www.adafruit.com/products/368
Please be positive and constructive with your questions and comments.