problem compiling RTClib

[Mark Snaterse]

I am having a problem compiling RTClib. I am using Arduino 1.0, and have downloaded the latest version of the library (from https://github.com/adafruit/RTClib). Below is the error I am getting. Any pointers in the right direction would be appreciated!

In file included from sketch_may14a.cpp:1:
C:\Documents and Settings\~\My Documents\Arduino\libraries\RTClib/RTClib.h:7: error: expected `)' before 't'
C:\Documents and Settings\~\My Documents\Arduino\libraries\RTClib/RTClib.h:8: error: expected `)' before 'year'
C:\Documents and Settings\~\My Documents\Arduino\libraries\RTClib/RTClib.h:11: error: 'uint16_t' does not name a type
C:\Documents and Settings\~\My Documents\Arduino\libraries\RTClib/RTClib.h:12: error: 'uint8_t' does not name a type
C:\Documents and Settings\~\My Documents\Arduino\libraries\RTClib/RTClib.h:13: error: 'uint8_t' does not name a type
C:\Documents and Settings\~\My Documents\Arduino\libraries\RTClib/RTClib.h:14: error: 'uint8_t' does not name a type
C:\Documents and Settings\~\My Documents\Arduino\libraries\RTClib/RTClib.h:15: error: 'uint8_t' does not name a type
C:\Documents and Settings\~\My Documents\Arduino\libraries\RTClib/RTClib.h:16: error: 'uint8_t' does not name a type
C:\Documents and Settings\~\My Documents\Arduino\libraries\RTClib/RTClib.h:17: error: 'uint8_t' does not name a type
C:\Documents and Settings\~\My Documents\Arduino\libraries\RTClib/RTClib.h:22: error: 'uint32_t' does not name a type
C:\Documents and Settings\~\My Documents\Arduino\libraries\RTClib/RTClib.h:25: error: 'uint8_t' does not name a type
C:\Documents and Settings\~\My Documents\Arduino\libraries\RTClib/RTClib.h:31: error: 'uint8_t' does not name a type
C:\Documents and Settings\~\My Documents\Arduino\libraries\RTClib/RTClib.h:33: error: 'uint8_t' does not name a type

[adafruit_support_rick]

You seem to missing a header file. Check that you have all the necessary #include statements at the top of your sketch.

[pburgess]

Hi Mark,

Is this with the ds1307 example sketch included with the library, or in your own code?

If your own code, make sure you're also including this file at the top of your sketch:

Code: Select all

#include <Wire.h>

[Mark Snaterse]

Thanks!

[platezero]

Thank you very much pburgess.

error: 'uint8_t' does not name a type
solved by include command

#include <Wire.h>

it's Work!