Memorial day is 05/25/2015 – Orders will ship out on May 26th. There will not be any deliveries or shipping on Monday. Any order placed after 11am ET on Friday May 22nd will not start to ship out until Tuesday May 26th.

WebIDE not showing
Moderators: adafruit_support_bill, adafruit

Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/

WebIDE not showing

by sonite on Mon Jan 14, 2013 11:13 am

Does this work with a soft float system?
I try to connect to address: http://192.168.1.104:3000/ and nothing happens?

I tried to restart at the Rasp and no problem there. I also tried to ping with success.
sonite
 
Posts: 2
Joined: Mon Jan 14, 2013 11:12 am

Re: WebIDE not showing

by delerious on Thu Jan 17, 2013 8:07 pm

don't know about soft float, but I finally managed to get in without using the port number (3000).
http://192.168.1.60 in my case.
delerious
 
Posts: 12
Joined: Thu Nov 22, 2012 5:09 pm

Re: WebIDE not showing

by sonite on Fri Jan 18, 2013 5:46 am

delerious wrote:don't know about soft float, but I finally managed to get in without using the port number (3000).
http://192.168.1.60 in my case.


Thanks, I tried that also. It might be a problem with the soft float drives!
sonite
 
Posts: 2
Joined: Mon Jan 14, 2013 11:12 am

Re: WebIDE not showing

by der-eddy on Sat Jan 19, 2013 4:45 pm

On the setup the scripts will try to use the Port 80 (standard) for the webide
if this port is occupied the script will use the Port 3000 instead
der-eddy
 
Posts: 1
Joined: Tue Jan 08, 2013 10:27 am

Re: WebIDE not showing

by MrHermit on Sat Jan 26, 2013 2:59 pm

I was having issues as well and was able to connect by using just the IP address and not identifying the port.
J
MrHermit
 
Posts: 2
Joined: Fri Dec 28, 2012 2:32 pm