Memorial day is 05/25/2015 – Orders will ship out on May 26th. There will not be any deliveries or shipping on Monday. Any order placed after 11am ET on Friday May 22nd will not start to ship out until Tuesday May 26th.

Problem with EEPROM
Moderators: adafruit_support_bill, adafruit

Problem with EEPROM

by shaadmahmud on Sat Jan 26, 2013 3:48 pm

I have one spoke POV but the EEPROM is not working and I could not find 25LC320, in my country they have only 25LC1024. So, my question is can I use 25LC1024 instead of 25LC320?
shaadmahmud
 
Posts: 2
Joined: Sat Jan 26, 2013 3:44 pm

Re: Problem with EEPROM

by adafruit_support_bill on Sun Jan 27, 2013 7:38 am

We have had it working with a 25LC256 viewtopic.php?f=17&t=25759&p=133617
We don't know if it will work with a larger one.

adafruit_support_bill
 
Posts: 37483
Joined: Sat Feb 07, 2009 10:11 am

Re: Problem with EEPROM

by shaadmahmud on Mon Jan 28, 2013 1:22 am

so, it will work with 25LC256?
shaadmahmud
 
Posts: 2
Joined: Sat Jan 26, 2013 3:44 pm

Re: Problem with EEPROM

by adafruit_support_bill on Mon Jan 28, 2013 7:21 am

As the post says,
the 25LC256 at one point did work and could store 32 images. HOWEVER it is a hacky EXTRA and not guaranteed whatsoever to function

adafruit_support_bill
 
Posts: 37483
Joined: Sat Feb 07, 2009 10:11 am

Re: Problem with EEPROM

by haak on Wed Oct 02, 2013 5:23 pm

please could you share with us default eeprom.hex ?
regards
User avatar
haak
 
Posts: 9
Joined: Wed Oct 02, 2013 2:33 pm

Re: Problem with EEPROM

by adafruit_support_bill on Wed Oct 02, 2013 5:37 pm

The firmware source and hex are available on the downloads page: http://www.ladyada.net/make/spokepov/download.html

adafruit_support_bill
 
Posts: 37483
Joined: Sat Feb 07, 2009 10:11 am

Re: Problem with EEPROM

by haak on Wed Oct 02, 2013 5:54 pm

adafruit_support_bill wrote:The firmware source and hex are available on the downloads page: http://www.ladyada.net/make/spokepov/download.html

but there is not eeprom.hex
I would like to write it with just simple avrdude command to my spokePOV to get it in same state as it was new.
User avatar
haak
 
Posts: 9
Joined: Wed Oct 02, 2013 2:33 pm