WebIDE processes not killed?
Moderators: adafruit_support_bill, adafruit

Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/

WebIDE processes not killed?

by wbp on Thu Feb 07, 2013 1:17 pm

Been using the WebIDE to try out the RPi and learn a few things. Works really well, nice job Adafruit! I do notice though that every Run or Debug seems to create a new process on the RPi that never goes away. After a while "ps -ef" shows a slew of them, and eventually I have to reboot the box.

William
User avatar
wbp
 
Posts: 226
Joined: Mon Mar 07, 2011 1:18 pm

Re: WebIDE processes not killed?

by adafruit on Thu Feb 07, 2013 7:05 pm

the most helpful thing you can do is put in an issue on github - that way our developer will be sure to see it :)
User avatar
adafruit
 
Posts: 11719
Joined: Thu Apr 06, 2006 4:21 pm
Location: nyc

Re: WebIDE processes not killed?

by wbp on Thu Feb 07, 2013 10:02 pm

Done. Took me a bit to find the repo, but it's posted now.
User avatar
wbp
 
Posts: 226
Joined: Mon Mar 07, 2011 1:18 pm

Re: WebIDE processes not killed?

by wbp on Tue Feb 12, 2013 4:52 pm

I posted this in the issue on github but thought I'd post it here as well.

Many of the examples floating around for the RPi have a "Press Ctrl-Z to end" message in them. I'm not sure where that came from, and I should know better, but since it was there, that's what I did. I guess I thought it might be something special for the WebIDE...

Of course it doesn't end the process, it only suspends it. No wonder I had all these processes sitting around! Doh...

It should, of course, say "Press Ctrl-C to end"...

William
User avatar
wbp
 
Posts: 226
Joined: Mon Mar 07, 2011 1:18 pm