Please be positive and constructive with your questions and comments.
-
- Topics
-
- List of working libs for the Arduino Due.
1, 2 - Last post by adafruit_support_rick
Sat Aug 20, 2016 9:42 am
- List of working libs for the Arduino Due.
-
- [Thermal Printer] Printing multiple bitmaps in a single line
by nicochulo2001 » Mon Oct 26, 2020 3:33 pm
- Last post by nicochulo2001
Wed Oct 28, 2020 2:33 pm
- [Thermal Printer] Printing multiple bitmaps in a single line
-
- HUZZAH ESP8266 breakout AT Commands part 2
- Last post by SJKaminsky
Tue Oct 27, 2020 7:30 pm
- HUZZAH ESP8266 breakout AT Commands part 2
-
- J Always Printing on Thermal Receipt Printer
- Last post by nicochulo2001
Tue Oct 27, 2020 11:52 am
- J Always Printing on Thermal Receipt Printer
-
- MMA8451 values unstable
- Last post by TheRafal
Mon Oct 26, 2020 4:55 pm
- MMA8451 values unstable
-
- PowerBoost 1000: USB @ < 2A, bypassing the mini-usb port?
- Last post by foodini
Fri Oct 23, 2020 4:34 pm
- PowerBoost 1000: USB @ < 2A, bypassing the mini-usb port?
-
- Feather nRF52 + Ultrasonic (Sonar) sensor
- Last post by arielee
Thu Oct 22, 2020 9:12 pm
- Feather nRF52 + Ultrasonic (Sonar) sensor
-
- Minimal GFX library
- Last post by Grantbharris
Thu Oct 22, 2020 6:12 pm
- Minimal GFX library
-
- question about sensors and boards thermal and ir-tof
- Last post by adafruit_support_bill
Thu Oct 22, 2020 5:55 am
- question about sensors and boards thermal and ir-tof
-
- Air Quality PM 2.5 with Data Logger Shield
- Last post by dastels
Tue Oct 20, 2020 7:03 pm
- Air Quality PM 2.5 with Data Logger Shield
-
- Arduino Uno R3 and NeoPixel Ring 12
by Tom_Henry » Mon Oct 19, 2020 11:32 pm
- Last post by adafruit_support_bill
Tue Oct 20, 2020 5:35 pm
- Arduino Uno R3 and NeoPixel Ring 12
-
- Problem Max31865 & PT1000
by buffalo » Fri Oct 16, 2020 9:16 am
- Last post by adafruit_support_carter
Tue Oct 20, 2020 1:07 pm
- Problem Max31865 & PT1000
-
- ADAFRUIT STEMMA SOIL SENSOR - I2C CAPACITIVE MOISTURE SENSOR
by weal » Wed Oct 14, 2020 3:18 pm
- Last post by weal
Mon Oct 19, 2020 6:28 pm
- ADAFRUIT STEMMA SOIL SENSOR - I2C CAPACITIVE MOISTURE SENSOR
-
- ps2+adarfruit
1, 2 - Last post by matana21
Sun Oct 18, 2020 11:21 am
- ps2+adarfruit
-
- AudioFX getting hot around the amp
- Last post by Graam
Thu Oct 15, 2020 5:23 pm
- AudioFX getting hot around the amp
-
- Micro-Lipo Charger w/ USB C (PID 4410) Not Charging
by J1024 » Mon Oct 12, 2020 9:23 pm
- Last post by adafruit_support_bill
Tue Oct 13, 2020 9:25 am
- Micro-Lipo Charger w/ USB C (PID 4410) Not Charging
-
- Adafruit LIS3DH INT1 state never changes
- Last post by 0miker0
Fri Oct 09, 2020 7:56 am
- Adafruit LIS3DH INT1 state never changes
-
- SI5351 clock generator
- Last post by NahuelArg
Tue Oct 06, 2020 11:40 am
- SI5351 clock generator
-
- TXB0104 Bi-Directional Level Shifter
by Evirtal » Fri Oct 02, 2020 5:49 am
- Last post by dastels
Mon Oct 05, 2020 10:58 am
- TXB0104 Bi-Directional Level Shifter
-
- nRF52840 with arduino-bluefruit-bleuart problem Using VS cod
- Last post by raothmist
Thu Oct 01, 2020 10:00 am
- nRF52840 with arduino-bluefruit-bleuart problem Using VS cod
-
- ICM-20948 vs BNO055? 9DOF for sport/vr
- Last post by themdrnsamurai
Thu Oct 01, 2020 8:16 am
- ICM-20948 vs BNO055? 9DOF for sport/vr
-
- Anemometer Wind Speed Sensor
- Last post by adafruit_support_carter
Mon Sep 28, 2020 6:57 pm
- Anemometer Wind Speed Sensor
-
- MLX90614 with I2C display device
1, 2 by iesre » Mon Sep 21, 2020 4:05 pm
- Last post by iesre
Mon Sep 28, 2020 2:07 pm
- MLX90614 with I2C display device
-
- bno055 with tinysine max7456 shield
by knoxvilles_Joker » Sat Feb 01, 2020 10:46 pm
- Last post by knoxvilles_Joker
Sun Sep 27, 2020 3:59 am
- bno055 with tinysine max7456 shield
-
- Adafruit Mini FX Sound board low volume
- Last post by oldblackcrow
Sat Sep 26, 2020 8:39 am
- Adafruit Mini FX Sound board low volume
-
- Tell me what to buy
- Last post by dastels
Thu Sep 24, 2020 10:54 am
- Tell me what to buy
-
- Grand Central with Music Maker Shield
- Last post by mikeysklar
Thu Sep 17, 2020 11:39 am
- Grand Central with Music Maker Shield
-
- FastLED (or alternatives) with Grand Central
- Last post by guitarist
Wed Sep 16, 2020 6:37 pm
- FastLED (or alternatives) with Grand Central
-
- PM25_Test.ino "Could not Read from AQI"
- Last post by mganucheau
Mon Sep 14, 2020 8:58 pm
- PM25_Test.ino "Could not Read from AQI"
-
- MAX4466 Mic Amp to RCA or 1/8" Audio Jack
by _beck » Fri Aug 14, 2020 11:08 am
- Last post by adafruit_support_bill
Mon Sep 14, 2020 1:38 pm
- MAX4466 Mic Amp to RCA or 1/8" Audio Jack
-
- Motor Shield "All call" 0x70 does not work, while board-spec
- Last post by mikeysklar
Tue Sep 08, 2020 7:27 pm
- Motor Shield "All call" 0x70 does not work, while board-spec
-
- Featherwing OLED (SH1107) Display Stays Black
- Last post by mikeysklar
Tue Sep 08, 2020 4:18 pm
- Featherwing OLED (SH1107) Display Stays Black
-
- Play Next/Skip Track
- Last post by Graam
Tue Sep 08, 2020 1:44 pm
- Play Next/Skip Track
-
- Adafruit Motor/Stepper/Servo Shield - on/off switch?
- Last post by adafruit_support_bill
Tue Sep 08, 2020 7:28 am
- Adafruit Motor/Stepper/Servo Shield - on/off switch?
-
- Anemometer Voltage to Current
by pedalermike » Sun Apr 19, 2020 1:03 pm
- Last post by ITAlexR
Sun Sep 06, 2020 1:26 pm
- Anemometer Voltage to Current
-
- DS3231 rtc DateTime::toString() not working
- Last post by amyuni
Fri Sep 04, 2020 10:00 am
- DS3231 rtc DateTime::toString() not working
-
- Multiple LIS2MDLs on SPI
- Last post by JaySee56
Wed Sep 02, 2020 12:52 pm
- Multiple LIS2MDLs on SPI
-
- VCNL4040 interrupt
- Last post by dastels
Tue Sep 01, 2020 11:24 am
- VCNL4040 interrupt
-
- Variants of the Small Reduction Stepper Motor - 12VDC 32-Ste
by WazDB » Fri Aug 28, 2020 6:57 pm
- Last post by adafruit_support_bill
Sat Aug 29, 2020 6:25 am
- Variants of the Small Reduction Stepper Motor - 12VDC 32-Ste
-
- MINI THERMAL PRINTER—Printing Extra Line
by pigminht » Fri Oct 04, 2019 7:04 pm
- Last post by bunker89320
Fri Aug 28, 2020 11:10 pm
- MINI THERMAL PRINTER—Printing Extra Line
-
- AS7262 rising Values
1, 2 by Momo_Mofloh » Wed Aug 26, 2020 4:44 am
- Last post by Momo_Mofloh
Fri Aug 28, 2020 8:12 am
- AS7262 rising Values
-
- MCP4728 - Burnt pin? - Channel A
- Last post by Turbo_Transformer
Thu Aug 27, 2020 4:51 pm
- MCP4728 - Burnt pin? - Channel A
-
- BNO055 changing modes
- Last post by mattse122
Thu Aug 27, 2020 10:52 am
- BNO055 changing modes
-
- Sound Board TxxNEXTx
by matt87hart » Tue Aug 25, 2020 12:10 pm
- Last post by adafruit_support_carter
Wed Aug 26, 2020 4:35 pm
- Sound Board TxxNEXTx
-
- Arduino IDE Huzzah 8266 settings not listed in the guide
- Last post by mikeysklar
Wed Aug 26, 2020 4:21 pm
- Arduino IDE Huzzah 8266 settings not listed in the guide
-
- Arduino IDE Settings For Huzzah ESP8266?
- Last post by Drizzt321
Wed Aug 26, 2020 1:45 pm
- Arduino IDE Settings For Huzzah ESP8266?
-
- Display and Neopixel Conflict
- Last post by phando
Tue Aug 25, 2020 3:44 pm
- Display and Neopixel Conflict
-
- Neotrellis M4 ADXL343 arduino
- Last post by palaka
Sat Aug 22, 2020 8:40 am
- Neotrellis M4 ADXL343 arduino
-
- Micro SD Card Extender / 4D Systems
by SteveSteve » Wed Aug 19, 2020 10:27 am
- Last post by SteveSteve
Fri Aug 21, 2020 4:59 pm
- Micro SD Card Extender / 4D Systems
-
- Adafruit BMP280 faulty barometric pressure
1, 2 by emilsjoeholm » Sat Aug 01, 2020 6:23 pm
- Last post by adafruit_support_carter
Thu Aug 20, 2020 11:54 am
- Adafruit BMP280 faulty barometric pressure
Please be positive and constructive with your questions and comments.