Please be positive and constructive with your questions and comments.
-
- Topics
-
- WS2801 over long distance
- Last post by chemdoc77
Mon Aug 20, 2018 11:22 pm
- WS2801 over long distance
-
- 2.4” TFT Featherwing “Finger up”
- Last post by flounder
Mon Aug 20, 2018 9:34 pm
- 2.4” TFT Featherwing “Finger up”
-
- Difference between the three 2.8" displays?
- Last post by oesterle
Mon Aug 20, 2018 9:17 pm
- Difference between the three 2.8" displays?
-
- Nth-light voltage, how low can I go?
- Last post by walshlg
Mon Aug 20, 2018 4:02 pm
- Nth-light voltage, how low can I go?
-
- Product 3919 specs inconsistent
- Last post by adafruit2
Mon Aug 20, 2018 2:09 pm
- Product 3919 specs inconsistent
-
- PiTFT 3.5” resistive touch failing on updating apt indexes
- Last post by adafruit_support_carter
Mon Aug 20, 2018 1:27 pm
- PiTFT 3.5” resistive touch failing on updating apt indexes
-
- PiTFT Plus but no /proc/device-tree/hat
- Last post by rquint
Mon Aug 20, 2018 1:17 pm
- PiTFT Plus but no /proc/device-tree/hat
-
- Neopixel Jewel Fiber Optic Attachment
by aaronaverill » Sun Aug 19, 2018 11:33 pm
- Last post by aaronaverill
Mon Aug 20, 2018 10:50 am
- Neopixel Jewel Fiber Optic Attachment
-
- Flexible 8x32 NeoPixel shipped broken?
by LuchPhi » Tue Aug 14, 2018 5:14 am
- Last post by adafruit2
Mon Aug 20, 2018 9:46 am
- Flexible 8x32 NeoPixel shipped broken?
-
- Mini neopixel DOUT shorted to ground?
- Last post by adafruit_support_bill
Mon Aug 20, 2018 5:53 am
- Mini neopixel DOUT shorted to ground?
-
- Edge lit neopixel badge help
- Last post by adafruit_support_bill
Sun Aug 19, 2018 2:25 pm
- Edge lit neopixel badge help
-
- DotStar Nano SMT Landing Pad
- Last post by adafruit2
Sun Aug 19, 2018 2:25 pm
- DotStar Nano SMT Landing Pad
-
- Dotstar Library with Rasp Pi 3 b+
- Last post by adafruit2
Sun Aug 19, 2018 2:08 pm
- Dotstar Library with Rasp Pi 3 b+
-
- MMC/SD card on the 3.5 inch LCD breakout
- Last post by adafruit2
Sun Aug 19, 2018 2:04 pm
- MMC/SD card on the 3.5 inch LCD breakout
-
- DotStar works on Arduino but NOT Pi Zero
by sterlingy » Tue Aug 14, 2018 1:14 am
- Last post by adafruit2
Sun Aug 19, 2018 2:03 pm
- DotStar works on Arduino but NOT Pi Zero
-
- call Adafruit_NeoPixel() within setup()
- Last post by adafruit_support_bill
Sun Aug 19, 2018 1:53 pm
- call Adafruit_NeoPixel() within setup()
-
- Small 8x8 dotstar matrix portable power questions
- Last post by adafruit2
Sun Aug 19, 2018 1:38 pm
- Small 8x8 dotstar matrix portable power questions
-
- 30 LED/meter version of Neopixel Side Light Strip?
- Last post by adafruit2
Sun Aug 19, 2018 1:10 pm
- 30 LED/meter version of Neopixel Side Light Strip?
-
- PiTFT on Pi Zero W mirroring problem
- Last post by adafruit2
Sun Aug 19, 2018 1:08 pm
- PiTFT on Pi Zero W mirroring problem
-
- BlinkyTape Project
by zerosix » Tue Aug 14, 2018 3:08 pm
- Last post by adafruit_support_bill
Sun Aug 19, 2018 1:06 pm
- BlinkyTape Project
-
- Dotstar 8x8 High Density matrix APA102-2020
- Last post by adafruit_support_bill
Sun Aug 19, 2018 12:52 pm
- Dotstar 8x8 High Density matrix APA102-2020
-
- Dr. Strange Spell Disks (Costuming Props)
by joshuakane » Sat Aug 18, 2018 8:14 am
- Last post by adafruit_support_bill
Sun Aug 19, 2018 12:46 pm
- Dr. Strange Spell Disks (Costuming Props)
-
- 5.0" TFT w/ Touch using RA8875 Screen Not working
by kvwillis311 » Sat Aug 11, 2018 9:48 pm
- Last post by adafruit2
Sun Aug 19, 2018 12:26 pm
- 5.0" TFT w/ Touch using RA8875 Screen Not working
-
- PiTFT fb1 output
- Last post by adafruit2
Sun Aug 19, 2018 12:23 pm
- PiTFT fb1 output
-
- Powering 9 10cm x 10 cm EL panels
- Last post by adafruit_support_bill
Sun Aug 19, 2018 12:23 pm
- Powering 9 10cm x 10 cm EL panels
-
- Ferrite bead values used in HDMI decoder board?
- Last post by adafruit2
Sun Aug 19, 2018 12:21 pm
- Ferrite bead values used in HDMI decoder board?
-
- 3.5" TFT 320x480 (PRODUCT ID: 2050)
- Last post by adafruit2
Sun Aug 19, 2018 11:54 am
- 3.5" TFT 320x480 (PRODUCT ID: 2050)
-
- 2.4" PiTFT White Screen
by mikewnz » Tue Aug 07, 2018 9:28 pm
- Last post by adafruit2
Sun Aug 19, 2018 11:47 am
- 2.4" PiTFT White Screen
-
- Defective TFT 2.8 Touch Shield (Capacitive)
by kev042 » Tue Aug 07, 2018 10:17 pm
- Last post by kev042
Sun Aug 19, 2018 10:15 am
- Defective TFT 2.8 Touch Shield (Capacitive)
-
- Any easy/non-destructive way to remove this glue from an LED
by dannymcgee » Sat Aug 18, 2018 3:18 pm
- Last post by oesterle
Sun Aug 19, 2018 2:34 am
- Any easy/non-destructive way to remove this glue from an LED
-
- Basic wiring question
by cogwun » Sat Aug 18, 2018 6:03 am
- Last post by oesterle
Sun Aug 19, 2018 1:28 am
- Basic wiring question
-
- Arduino Uno 2.8" TFT LCD Shield w/Touchscreen Showing White
- Last post by WastefulNick
Sat Aug 18, 2018 6:10 pm
- Arduino Uno 2.8" TFT LCD Shield w/Touchscreen Showing White
-
- Hi, Need help!
- Last post by adafruit_support_bill
Sat Aug 18, 2018 2:20 pm
- Hi, Need help!
-
- Neopixel Jewel 10 Minute Necklace
- Last post by abra1c
Sat Aug 18, 2018 1:23 am
- Neopixel Jewel 10 Minute Necklace
-
- NeoPixel Dot Strand not responding to controller
by krwanamaker » Fri Jun 29, 2018 2:49 pm
- Last post by franklin97355
Fri Aug 17, 2018 9:36 pm
- NeoPixel Dot Strand not responding to controller
-
- Nokia 5110 Monochrome LCD Display
by kylemanning14 » Fri Aug 17, 2018 3:26 pm
- Last post by oesterle
Fri Aug 17, 2018 7:22 pm
- Nokia 5110 Monochrome LCD Display
-
- PiTFT - touch suddenly not working
- Last post by rdarwish
Fri Aug 17, 2018 6:50 pm
- PiTFT - touch suddenly not working
-
- Possibly broken 3.5" display
- Last post by rquint
Fri Aug 17, 2018 3:44 pm
- Possibly broken 3.5" display
-
- Individual dimming of rgb leds with ht16k33
- Last post by oesterle
Fri Aug 17, 2018 2:24 pm
- Individual dimming of rgb leds with ht16k33
-
- Bigger capacitive PiTFT?
- Last post by elru
Thu Aug 16, 2018 10:23 pm
- Bigger capacitive PiTFT?
-
- Parallel Neopixel Strips
- Last post by franklin97355
Thu Aug 16, 2018 8:58 pm
- Parallel Neopixel Strips
-
- How many decoupling caps on a neopixel board?
- Last post by phillipps76
Thu Aug 16, 2018 5:37 pm
- How many decoupling caps on a neopixel board?
-
- NEOPIXEL can burn out the microcontroller?
by galaktika » Wed Aug 15, 2018 9:25 am
- Last post by galaktika
Wed Aug 15, 2018 3:59 pm
- NEOPIXEL can burn out the microcontroller?
-
- which product should I chose ?
- Last post by gregarious2
Wed Aug 15, 2018 12:35 pm
- which product should I chose ?
-
- How to test if 7 Segment Buildpack is Borked.
- Last post by adafruit_support_bill
Wed Aug 15, 2018 5:47 am
- How to test if 7 Segment Buildpack is Borked.
-
- DotStar 8x8 PCB specs?
by sterlingy » Tue Aug 14, 2018 8:54 pm
- Last post by sterlingy
Tue Aug 14, 2018 11:33 pm
- DotStar 8x8 PCB specs?
-
- Neopixel RGBW warm white LED strips
- Last post by oesterle
Tue Aug 14, 2018 9:12 pm
- Neopixel RGBW warm white LED strips
-
- LCD Screen alignment issues (#2407)
by sethjones » Thu Aug 02, 2018 10:32 am
- Last post by adafruit2
Tue Aug 14, 2018 5:12 pm
- LCD Screen alignment issues (#2407)
-
- Can i power LED's with ELwire ?
by waltervd » Tue Aug 14, 2018 3:33 pm
- Last post by adafruit_support_bill
Tue Aug 14, 2018 4:04 pm
- Can i power LED's with ELwire ?
Please be positive and constructive with your questions and comments.