Please be positive and constructive with your questions and comments.
-
- Announcements
-
- CircuitPython 4.0.0 Alpha 3 released!
- Last post by tannewt2
Thu Nov 15, 2018 8:51 pm
- CircuitPython 4.0.0 Alpha 3 released!
-
- CircuitPython 3.1.1 Released!
- Last post by danhalbert
Fri Nov 02, 2018 11:22 am
- CircuitPython 3.1.1 Released!
-
- CircuitPython 3.0.0 released!
- Last post by danhalbert
Mon Jul 16, 2018 8:52 am
- CircuitPython 3.0.0 released!
-
- Topics
-
- Restart CP VM from Jupyter
- Last post by ttmetro
Fri Nov 16, 2018 2:43 am
- Restart CP VM from Jupyter
-
- Circuitpython and Dragonboard 410c
- Last post by franklin97355
Fri Nov 16, 2018 1:29 am
- Circuitpython and Dragonboard 410c
-
- Chaining two TLC5947
by Meedly » Fri Aug 24, 2018 2:23 pm
- Last post by adafruit_support_carter
Thu Nov 15, 2018 6:42 pm
- Chaining two TLC5947
-
- build error on emitnative.c
- Last post by johncblacker
Thu Nov 15, 2018 4:53 pm
- build error on emitnative.c
-
- Feather M4 Express serial port creation
- Last post by patf123
Thu Nov 15, 2018 12:12 pm
- Feather M4 Express serial port creation
-
- Detect external power source
by jak3 » Thu Nov 15, 2018 10:32 am
- Last post by jak3
Thu Nov 15, 2018 11:50 am
- Detect external power source
-
- Trells M4 Syntax Error or Import error adafruit_trellism4
by rickroades » Mon Nov 12, 2018 9:13 pm
- Last post by rickroades
Wed Nov 14, 2018 10:18 am
- Trells M4 Syntax Error or Import error adafruit_trellism4
-
- audioio on TrinketM0?
- Last post by tannewt2
Wed Nov 14, 2018 4:32 am
- audioio on TrinketM0?
-
- Using the GPIO pin as an interupt/ event listener
- Last post by tannewt2
Wed Nov 14, 2018 4:30 am
- Using the GPIO pin as an interupt/ event listener
-
- SAMD21 SPI slow...
- Last post by tannewt2
Wed Nov 14, 2018 4:23 am
- SAMD21 SPI slow...
-
- File system corrupt after reset
- Last post by tannewt2
Sun Nov 11, 2018 10:26 pm
- File system corrupt after reset
-
- Can not set up an SPI bus
- Last post by tannewt2
Sun Nov 11, 2018 10:22 pm
- Can not set up an SPI bus
-
- Problems building circuitpython no module named huffman
- Last post by johncblacker
Sun Nov 11, 2018 6:16 pm
- Problems building circuitpython no module named huffman
-
- C# call circuitpython function
- Last post by kevinjwalters
Sun Nov 11, 2018 12:52 pm
- C# call circuitpython function
-
- Which language? Python or Aurduino
- Last post by esquagga
Fri Nov 09, 2018 5:44 pm
- Which language? Python or Aurduino
-
- Adafruit MPRLS Ported Pressure Sensor
by nineseventytwo » Sat Nov 03, 2018 1:34 pm
- Last post by nineseventytwo
Thu Nov 08, 2018 9:18 pm
- Adafruit MPRLS Ported Pressure Sensor
-
- Controlling Dual PixelRIngs
- Last post by nominalindltd
Thu Nov 08, 2018 6:41 pm
- Controlling Dual PixelRIngs
-
- New GFX for CircuitPython
1, 2, 3 - Last post by johncblacker
Thu Nov 08, 2018 4:19 pm
- New GFX for CircuitPython
-
- CircuitPython, case/switch, and state machines
- Last post by danhalbert
Thu Nov 08, 2018 2:43 pm
- CircuitPython, case/switch, and state machines
-
- Last white LED in Neopixel 8x8 matrix not responding
by AlbiTiba » Tue Nov 06, 2018 4:33 am
- Last post by adafruit2
Thu Nov 08, 2018 12:41 pm
- Last white LED in Neopixel 8x8 matrix not responding
-
- On CircuitPython and Micropython
- Last post by geekguy
Thu Nov 08, 2018 12:31 pm
- On CircuitPython and Micropython
-
- M0 Code runs fine when save file. But crashes when reset
- Last post by Foamyguy
Wed Nov 07, 2018 10:55 pm
- M0 Code runs fine when save file. But crashes when reset
-
- Strange behavior on Trnket M0
- Last post by indiwerwlf
Wed Nov 07, 2018 6:57 pm
- Strange behavior on Trnket M0
-
- Raspberry Pi and Circuitpython ht16k33
- Last post by geekguy
Tue Nov 06, 2018 9:12 pm
- Raspberry Pi and Circuitpython ht16k33
-
- New CPX die (D6) with total typed on keyboard
- Last post by adafruit2
Tue Nov 06, 2018 12:05 am
- New CPX die (D6) with total typed on keyboard
-
- Working with arrays in circuit python
- Last post by kevinjwalters
Fri Nov 02, 2018 9:05 am
- Working with arrays in circuit python
-
- CircuitPython built-in (frozen) libraries (memory saving)
- Last post by danhalbert
Fri Nov 02, 2018 8:43 am
- CircuitPython built-in (frozen) libraries (memory saving)
-
- Crickit and HCSR04
- Last post by kevinjwalters
Tue Oct 30, 2018 8:40 pm
- Crickit and HCSR04
-
- switching between arduino and cp on itsy m4
- Last post by kenidowa
Tue Oct 30, 2018 6:59 pm
- switching between arduino and cp on itsy m4
-
- Python code for multiple PCA9685
- Last post by pgbrock1
Tue Oct 30, 2018 1:42 pm
- Python code for multiple PCA9685
-
- CP for Feather M4 Excpreaa dn Crickit
- Last post by timgtech
Tue Oct 30, 2018 7:56 am
- CP for Feather M4 Excpreaa dn Crickit
-
- NRF52832 external flash
- Last post by Cashew22
Mon Oct 29, 2018 1:30 pm
- NRF52832 external flash
-
- I2C and TMP100 module
- Last post by tannewt2
Mon Oct 29, 2018 12:54 pm
- I2C and TMP100 module
-
- Bytearray and bad "print"
- Last post by jerryn
Sun Oct 28, 2018 3:33 pm
- Bytearray and bad "print"
-
- CircuitPython wifi, jpg and json libraries?
- Last post by jimwims
Sat Oct 27, 2018 3:42 pm
- CircuitPython wifi, jpg and json libraries?
-
- NRF52840 BOOTLOADER
- Last post by danhalbert
Fri Oct 26, 2018 10:53 am
- NRF52840 BOOTLOADER
-
- Vibration activated piezo alarm w/ Gemma, increase sound pla
- Last post by tjseb
Fri Oct 26, 2018 10:47 am
- Vibration activated piezo alarm w/ Gemma, increase sound pla
-
- Adafruit BME680 via SPI on Raspberry Pi
- Last post by dani146cluj
Thu Oct 25, 2018 1:54 pm
- Adafruit BME680 via SPI on Raspberry Pi
-
- Memory allocation error in cpx.play_file()
by jct4764 » Fri Oct 19, 2018 11:20 am
- Last post by adafruit_support_carter
Wed Oct 24, 2018 11:45 pm
- Memory allocation error in cpx.play_file()
-
- pulseio module
- Last post by jerryn
Wed Oct 24, 2018 9:58 pm
- pulseio module
-
- pIRkey availability?
- Last post by ptmartin
Wed Oct 24, 2018 6:58 pm
- pIRkey availability?
-
- SSL connection (HUZZAH)
- Last post by tiberek
Tue Oct 23, 2018 4:43 pm
- SSL connection (HUZZAH)
-
- REPL over UART
- Last post by tannewt2
Tue Oct 23, 2018 12:37 pm
- REPL over UART
-
- ws2801 python library
- Last post by johncblacker
Tue Oct 23, 2018 10:47 am
- ws2801 python library
-
- HalloWing / Neopixel / CircuitPython
- Last post by g603
Mon Oct 22, 2018 10:49 pm
- HalloWing / Neopixel / CircuitPython
-
- Gemma M0 does not execute main.py
by Gmichaels » Mon Oct 15, 2018 2:04 am
- Last post by danhalbert
Fri Oct 19, 2018 2:40 pm
- Gemma M0 does not execute main.py
-
- CIRCUITPYTHON = UART
- Last post by tcpipchip
Fri Oct 19, 2018 5:58 am
- CIRCUITPYTHON = UART
-
- Unable to Build NeoPixel on Rasp Pi Zero
- Last post by bpb
Thu Oct 18, 2018 11:20 am
- Unable to Build NeoPixel on Rasp Pi Zero
-
- TSL2591 Pycom
- Last post by danhalbert
Wed Oct 17, 2018 11:16 pm
- TSL2591 Pycom
Please be positive and constructive with your questions and comments.