Hi guys,
I'm having a bit of hard time with my MiniPov4,
as 2 of the 8 LEDs are misbehaving, meaning they don't display the correct colors.
I created a series of test images (red only, green only, blue only, white only) so you can see
what's going on (LEDs 6 and 8 are the 'bad' ones).
I figured the max resolution for graphics is 127x8px at 72 DPI,
everything that exceeds this resolution cannot be displayed by the MiniPov4.
But even with smaller sizes my problem persists.
I thought I soldered everything up correctly, however, I'm going to recheck and attach some
pics for you, as well.
Any help would be greatly appreciated!
Best regards,
Chris
MINIPOV4: 2 LEDS MISBEHAVING
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- Skysurfer
- Posts: 3
- Joined: Mon Dec 19, 2016 12:58 pm
MINIPOV4: 2 LEDS MISBEHAVING
- Attachments
-
- 20161219_110458.jpg (854.96 KiB) Viewed 2935 times
-
- 20161219_110601_resized.jpg (233.66 KiB) Viewed 2935 times
-
- 20161213_230741_resized.jpg (332.51 KiB) Viewed 2935 times
- Skysurfer
- Posts: 3
- Joined: Mon Dec 19, 2016 12:58 pm
Re: MINIPOV4: 2 LEDS MISBEHAVING
Here are some more pics:
- Attachments
-
- 20161213_234210_resized.jpg (333.42 KiB) Viewed 2934 times
-
- 20161219_110652_resized.jpg (281.12 KiB) Viewed 2934 times
-
- 20161219_110828_resized.jpg (255.88 KiB) Viewed 2934 times
- Skysurfer
- Posts: 3
- Joined: Mon Dec 19, 2016 12:58 pm
Re: MINIPOV4: 2 LEDS MISBEHAVING
Any suggestions?
Please be positive and constructive with your questions and comments.