Very wrong voltages on BA662

Discuss x0x construction and related issues

Moderators: altitude, adafruit_support_bill, adafruit, phono, hamburgers

Please be positive and constructive with your questions and comments.
Locked
User avatar
Faye_108
 
Posts: 4
Joined: Wed Oct 30, 2019 11:02 am

Very wrong voltages on BA662

Post by Faye_108 »

Firstly I'm sorry to open a second topic within a few days. I went through dozens of topics with no solution. :(
Here's my problem: I finished building the VCA. Unfortunately there is zero output if I do the headphone test to hear the "struck note".

What seems strange are the DC bias on the BA662A (BA662 Clown openmusiclabs) :

pin1 = 120mV
pin2 = 5.33V
pin3 = 5.33V
pin4 = 11.9V
pin5 = 0.5mV
pin6 = 5.25V
pin7 = 5.25V
pin8 = 5.3V
pin9 = 11.9V


If I'm not mistaken, only pin 2 and 3 are exchanged in comparison to the BA6110.

I already checked twice for any solder bridges, but didn't find anything.

(Yes, I soldered it on IC15A and omitted Q1/Q2/Q3/Q4)

Thank you for your help.

User avatar
Faye_108
 
Posts: 4
Joined: Wed Oct 30, 2019 11:02 am

Re: Very wrong voltages on BA662

Post by Faye_108 »

It seems that the BA662 was faulty.
Out of pure desperation I desoldered it and replaced it by a BA6110 that I had at hand. Luckily on the BA6110 all voltages were normal.
Thank you for your time.

Locked
Please be positive and constructive with your questions and comments.

Return to “Making x0x”