Is anyone using Atmega162 Au (tqfp44) to make x0xb0x?

Discuss x0x construction and related issues

Moderators: altitude, adafruit_support_bill, adafruit, phono, hamburgers

Please be positive and constructive with your questions and comments.
Locked
User avatar
supercaby
 
Posts: 4
Joined: Mon Oct 05, 2020 12:12 am

Is anyone using Atmega162 Au (tqfp44) to make x0xb0x?

Post by supercaby »

Hello everyone,
I'm making my x0xb0x. Because there is no Atmega162 16PU temporarily, I connect an Atmega162 16AU(TQFP44) with an adapter board and flying wire. After flashing the firmware, it seems that it works (the LED, encoder and keys look good), but there is no sound. I detected the pin 7 of ic11. No matter which key I press, it always remains at about 0.7V, So I tried to modify the fuse, l: FF, H: DC, e: FF, so that the pin 7 of ic11 becomes 4.08v, which still remains unchanged. Does anyone try to use Atmega162 16au? What should the fuse be set to?

Locked
Please be positive and constructive with your questions and comments.

Return to “Making x0x”