0

MarOS1.5.0 - Beta Version
Moderators: altitude, adafruit_support_bill, adafruit, phono, hamburgers

Please be positive and constructive with your questions and comments.

Re: MarOS1.5.0 - Beta Version

by sahko on Fri Nov 03, 2017 4:38 am

Not being near my b0x ATM, I try to recap this from the top of my mind:
When the starting point (the pattern selected at the beginning of a session) is any other than Patt 1, the jumps are rather relative than absolute. Like starting from Patt 5, then sending MIDI PGM 1 wouldn't lead you to Patt 1 on the b0x, but somewhere else.
Does my explanation make sense?

sahko
 
Posts: 7
Joined: Wed Nov 01, 2017 2:10 pm

Re: MarOS1.5.0 - Beta Version

by tupinamba on Sun Nov 26, 2017 4:25 pm

Hi everyone!
I hope I'm not posting off-topic here...
I've been trying to control my MarOS x0xb0x with the pads of my MPC (Midi Note mode). The Midi notes corresponding to the pads of the MPC are actually played by the x0xb0x... But the release doesn't work : the note continues until another pad is pressed, and then it switches to the new Midi note.
This is weird as I've tried the MPC with other synths (DSI OB-6 for instance), and the synths do stop playing the note when the pad is no longer pressed...
Is this a known issue of the x0xb0x / MarOS?
Thank you in advance!
Regards,
Tupinamba
tupinamba
 
Posts: 59
Joined: Fri May 06, 2011 5:30 am

Re: MarOS1.5.0 - Beta Version

by ioth on Sun Nov 26, 2017 4:40 pm

Normally External Midi note control works just fine on Mar OS.
Seems your MPC is at fault.
Maybe try reflashing the os to work it out!

ioth
 
Posts: 25
Joined: Thu May 04, 2017 7:16 am

Re: MarOS1.5.0 - Beta Version

by sahko on Sun Nov 26, 2017 4:47 pm

I can confirm that a MPC (3000 in my case) plays MIDI notes to the x0x just fine.

sahko
 
Posts: 7
Joined: Wed Nov 01, 2017 2:10 pm

Re: MarOS1.5.0 - Beta Version

by tupinamba on Sun Nov 26, 2017 6:30 pm

Thanks for your replies!
That is weird as the x0x is the only synth of mine having this issue with the MPC (1000)...
tupinamba
 
Posts: 59
Joined: Fri May 06, 2011 5:30 am

Re: MarOS1.5.0 - Beta Version

by Nordcore on Mon Nov 27, 2017 5:14 am

Check with the MIDI THRU:
So MPC1000 to MIDI in, any other synth on MIDI THRU. Does it work proper?

If not: there is something wrong in the receiver part around the opto coupler in your x0x.

Nordcore
 
Posts: 88
Joined: Sat May 23, 2015 3:14 pm

Re: MarOS1.5.0 - Beta Version

by hiroikezawa on Fri Dec 29, 2017 5:40 am

Hi Nordcore

Can I get the source code?
I want to use Phrygian scale instead of Chromatic scale and Blues scale instead of Pentatonic scale.
I can customize and build it myself.

hiroikezawa
 
Posts: 1
Joined: Fri Dec 29, 2017 5:32 am

Re: MarOS1.5.0 - Beta Version

by Nordcore on Tue Jan 09, 2018 5:14 am

Yes, it is intended as open source.
At the moment I just stick to "ask for, if you want to have it", as there are still some (minor) issues to be fixed.
(MIDI program change, blink with R/S as long as it is waiting for sync to the next bar ...)

If you let me know about your changes I'll integrate them in the source. I already have some "#define" configuration switches for such features.

ATM I don't have the source here, I'll send it to you when I'm back home.

Nordcore
 
Posts: 88
Joined: Sat May 23, 2015 3:14 pm

Please be positive and constructive with your questions and comments.