0

VCA Envelope on forever mod not functioning
Moderators: altitude, adafruit_support_bill, adafruit, phono, hamburgers

Please be positive and constructive with your questions and comments.

VCA Envelope on forever mod not functioning

by Dixie237 on Mon Feb 17, 2014 3:39 pm

Hi all,
I'm working with a friend to mod up my unit. So far we have added 2 extra oscillators with independent volume control and power on / off control and delay. All good, works fine, sounds like an animal.
Next mod on the list was the VCA Envelope on forever mod. So we did this, installed and fully tested, switch, 12v feed etc (my mate is a qualified electrical technician by trade so pro soldering and testing) ...however switch activation produces no difference. I was (correct me if I am wrong) expecting upon switch activation to have the current note in the sequence hold. Again nothing.
Am I understanding this mods function correctly?
I have run the unit with only the first osc, volume off and triggered. No difference
Volume up, envelope fully down and triggered. No difference.
Combinations of the above to no effect.

I have just read online that perhaps in need the Gate on forever mod in conjunction with this to produce the "note on forever" I am after.

Any help much appreciated. Thanks in advance all.

Cheers
D
Dixie237
 
Posts: 4
Joined: Tue May 08, 2012 3:54 pm

Re: VCA Envelope on forever mod not functioning

by Dixie237 on Wed Feb 19, 2014 5:38 am

OK so tracked down this old post
viewtopic.php?f=13&p=19107

It seems that this is my problem and I need to modify as per posts solution.

Any further comments appr......

Cheers

D 8)
Dixie237
 
Posts: 4
Joined: Tue May 08, 2012 3:54 pm

Please be positive and constructive with your questions and comments.