Due to high demand expect some shipping delays at this time, orders may not ship for 1-2 business days.
0

Wave Bubble 2010
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

Re: Wave Bubble 2010

by Mictronics on Mon Dec 13, 2010 2:38 am

The basic design is proved to work. For now I see no advantage in another design changes.
/Michael
Mictronics
 
Posts: 63
Joined: Sat Feb 20, 2010 3:16 pm

Re: Wave Bubble 2010

by MattyCiii on Mon Dec 13, 2010 7:02 pm

I'd be interested in buying a bare board if there is a group but too.
MattyCiii
 
Posts: 1
Joined: Sat Nov 06, 2010 8:15 am

Re: Wave Bubble 2010

by b1nary on Wed Dec 15, 2010 12:39 am

I would be interested in the order of the pcb order
b1nary
 
Posts: 14
Joined: Fri Dec 10, 2010 11:45 pm

Re: Wave Bubble 2010

by Durgo on Mon Dec 20, 2010 8:22 pm

Count me in for an order of black PCBs!
Durgo
 
Posts: 1
Joined: Mon Dec 20, 2010 7:55 pm

Re: Wave Bubble 2010

by erich81 on Fri Jan 07, 2011 3:13 pm

I'd also be interested in a set of boards for the updated design, as I was trying to figure out how to panelize layouts before submitting, but if we all order it'll be cheaper than individually doing it.

If they aren't that expensive, I'd be in for 2 sets. Haven't touched electronics in a long time, but as I work for an RFID company, reading the posts in here and doing some of the projects is really teaching me a lot. I'd be interested to see a design that does include a LCD that could maybe show frequencies being jammed, voltage levels/charge state, etc.

also, only the schematics for the power board seem to be available, does anyone have the full panel PCB .BRD or gerber files, ready to send to manufacturer, preferably already in a panel file so I can submit just one file?

erich81
 
Posts: 35
Joined: Wed Jan 05, 2011 3:50 pm

Re: Wave Bubble 2010

by Mictronics on Sat Jan 08, 2011 1:42 am

Schematic and layout for the main board will be released when I'm done with all test's and programming.

An LCD is not planed and in my opinion not needed, but the SPI on the ISP connector is free so one can hook up a Nokia graphic LCD from a cell phone there.
/Michael
Mictronics
 
Posts: 63
Joined: Sat Feb 20, 2010 3:16 pm

Re: Wave Bubble 2010

by erich81 on Tue Jan 11, 2011 8:55 pm

Sounds good. Thanks for spending the time to share your revised work with the community. Do you have any update on group order for the boards?

erich81
 
Posts: 35
Joined: Wed Jan 05, 2011 3:50 pm

Re: Wave Bubble 2010

by Palmer Eldritch on Thu Jan 13, 2011 11:19 pm

Is it too late to get in on the order? I'd like to get 2 boards please!

TX/RX Labs members will love them...
Palmer Eldritch
 
Posts: 1
Joined: Thu Jan 13, 2011 11:16 pm

Re: Wave Bubble 2010

by Mictronics on Sun Jan 16, 2011 1:21 pm

Update the wiki with schematic, board file and pictures of the main board. Believed to be error free. Automatic DRC reports nothing.

Source code and firmware for hardware test will be next.
/Michael
Mictronics
 
Posts: 63
Joined: Sat Feb 20, 2010 3:16 pm

Re: Wave Bubble 2010

by crease-guard on Mon Jan 17, 2011 5:17 am

I would be interested in several sets of these boards when you are ready to do a run.

Jay
crease-guard
 
Posts: 1
Joined: Mon Jan 17, 2011 5:16 am

Re: Wave Bubble 2010

by coolman2024 on Fri Jan 21, 2011 1:20 am

I too would like a couple sets of boards if it is not too late
coolman2024
 
Posts: 1
Joined: Fri Jan 21, 2011 1:19 am

Re: Wave Bubble 2010

by antman on Mon Jan 24, 2011 1:05 am

I would love to buy a set of the pcb's as well. Please advise if their are any of the sets available.
antman
 
Posts: 3
Joined: Tue Feb 19, 2008 7:17 pm
Location: Austin, TX

Re: Wave Bubble 2010

by ahmed on Mon Jan 24, 2011 2:53 am

I am trying to make a jammer
I want to ask is sawtooth directly given to vco ,or there is some dc adjustmant made by atmega microcontroller
so that sweep must trace bursts and cater for handover
ahmed
 
Posts: 1
Joined: Mon Jan 24, 2011 1:55 am

Re: Wave Bubble 2010

by Mictronics on Mon Jan 24, 2011 5:06 am

ahmed wrote:I am trying to make a jammer
I want to ask is sawtooth directly given to vco ,or there is some dc adjustmant made by atmega microcontroller
so that sweep must trace bursts and cater for handover

The sawtooth is modulated on an adjustable DC offset. The DC offset will set the centre frequency of your sweep, the sawtooth will set the bandwidth around the centre frequency.

@ All
AFAIK nobody did a PCB batch run so far. But I will no do, but there was already an offer from someone else.
/Michael
Mictronics
 
Posts: 63
Joined: Sat Feb 20, 2010 3:16 pm

Re: Wave Bubble 2010

by cofhal on Tue Jan 25, 2011 7:20 pm

I need buy the pcb board for this proyect
cofhal
 
Posts: 2
Joined: Tue Jan 25, 2011 7:19 pm

Please be positive and constructive with your questions and comments.