Wave Bubble RKE Jammer @ 315 & 433.92 Mhz?

The operation of transmitters designed to jam or block wireless communications is a violation of the Communications Act of 1934, as amended ("Act"). See 47 U.S.C. Sections 301, 302a, 333. The Act prohibits any person from willfully or maliciously interfering with the radio communications of any station licensed or authorized under the Act or operated by the U.S. government. 47 U.S.C. Section 333. The manufacture, importation, sale or offer for sale, including advertising, of devices designed to block or jam wireless transmissions is prohibited. 47 U.S.C. Section 302a(b). Parties in violation of these provisions may be subject to the penalties set out in 47 U.S.C. Sections 501-510. Fines for a first offense can range as high as $11,000 for each violation or imprisonment for up to one year, and the device used may also be seized and forfeited to the U.S. government.

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
coljohnhannibalsmith
 
Posts: 11
Joined: Sat Feb 23, 2008 1:17 am

Wave Bubble RKE Jammer @ 315 & 433.92 Mhz?

Post by coljohnhannibalsmith »

Is it possible to adapt your design to 315 & 433.92 Mhz? These are the frequencies that remote keyless entry & car alarm systems operate on. I'd also like to boost the power to about 1W.

My neighbors and I have a problem where some of the local youth think it's very funny to set their car alarms off remotely in the middle of the night and I'd like to be able to put an end to this.

Also, I can't open the RC1a Gerbers with either Gebrv v1.2 or v1.3 and I can't find a version of Eagle Cad that will install on Ubuntu AMD64. Not even CadSoft.de seems to be able to help. Any suggestions?



Thanks, John

inh
 
Posts: 102
Joined: Mon Aug 27, 2007 6:49 am

suggestions

Post by inh »

if you look at the suppliers of vcos you will easily get versions for those frequencies - not sure if you will be ok with the pll though - you should check the datasheet.

as for operating system advice - buy a pc!

aiswa
 
Posts: 1
Joined: Mon Jul 22, 2013 7:08 am

Re: Wave Bubble RKE Jammer @ 315 & 433.92 Mhz?

Post by aiswa »

Yes Most car remote control is working on 315 mhz 433 and 868 Mhz
I have find more good 315 433 868 jammer (4W to 50W OUTPUT)
http://aiswa.com/category-406-b0-315433868M+Jammer.html

User avatar
cts2001
 
Posts: 2
Joined: Wed Jan 14, 2015 10:21 am

Re: Wave Bubble RKE Jammer @ 315 & 433.92 Mhz?

Post by cts2001 »


Locked
Please be positive and constructive with your questions and comments.

Return to “Wave Bubble”