Is it possible to adapt your design to 315 & 433.92 Mhz? These are the frequencies that remote keyless entry & car alarm systems operate on. I'd also like to boost the power to about 1W.
My neighbors and I have a problem where some of the local youth think it's very funny to set their car alarms off remotely in the middle of the night and I'd like to be able to put an end to this.
Also, I can't open the RC1a Gerbers with either Gebrv v1.2 or v1.3 and I can't find a version of Eagle Cad that will install on Ubuntu AMD64. Not even CadSoft.de seems to be able to help. Any suggestions?
Thanks, John
Wave Bubble RKE Jammer @ 315 & 433.92 Mhz?
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
-
- Posts: 11
- Joined: Sat Feb 23, 2008 1:17 am
-
- Posts: 102
- Joined: Mon Aug 27, 2007 6:49 am
suggestions
if you look at the suppliers of vcos you will easily get versions for those frequencies - not sure if you will be ok with the pll though - you should check the datasheet.
as for operating system advice - buy a pc!
as for operating system advice - buy a pc!
-
- Posts: 1
- Joined: Mon Jul 22, 2013 7:08 am
Re: Wave Bubble RKE Jammer @ 315 & 433.92 Mhz?
Yes Most car remote control is working on 315 mhz 433 and 868 Mhz
I have find more good 315 433 868 jammer (4W to 50W OUTPUT)
http://aiswa.com/category-406-b0-315433868M+Jammer.html
I have find more good 315 433 868 jammer (4W to 50W OUTPUT)
http://aiswa.com/category-406-b0-315433868M+Jammer.html
- cts2001
- Posts: 2
- Joined: Wed Jan 14, 2015 10:21 am
Re: Wave Bubble RKE Jammer @ 315 & 433.92 Mhz?
What is 315 433.92mhz jammer?http://ctstechnologys.com/store/car-rem ... ammer.html
Please be positive and constructive with your questions and comments.