๐Ÿ“ฃ๐Ÿ“ช ๐Ÿšš Adafruit will not be shipping USPS orders Monday January 20, 2020 ๐Ÿ—“. Expedited USPS orders placed after 11am ET ๐Ÿ•š Friday January 17 will go out Tuesday January 21 ๐Ÿ“ฃ๐Ÿ“ช๐Ÿšš
0

WB2010 Rev 2B BOM
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

WB2010 Rev 2B BOM

by manolorutu on Mon Jun 02, 2014 1:54 pm

Hello, I'm from Spain so forgive my english,

First I'd like to thank the work done by the heads of Wave Bubble, versions and related work. Here I found important and complete information.
I explain my question:
I will order 4 PCB sets, and this boards are 2010 rev 2b. The overlapping traces on D4 and D5 have been fixed, the R43 resistor have been put back on, and there's a new switch.

Is the BOM shown here the correct BOM for this design/rev?
http://ladyada.net/wiki/wavebubble/wave_bubble_2010

I've read this thread http://forums.adafruit.com/viewtopic.php?f=16&t=14782 (or tried) and I didn't find anything that confirms or denies it. If the BOM I've indicated isn't the appropriate, please somebody tell me the correct way.

I await a response. Thanks!
manolorutu
 
Posts: 3
Joined: Thu May 29, 2014 11:25 am

Re: WB2010 Rev 2B BOM

by manolorutu on Wed Jun 04, 2014 12:01 pm

Yes, the BOM is correct:
Attachments
correct.jpg
correct.jpg (128.32 KiB) Viewed 2277 times
manolorutu
 
Posts: 3
Joined: Thu May 29, 2014 11:25 am

Please be positive and constructive with your questions and comments.