Hello, I'm from Spain so forgive my english,
First I'd like to thank the work done by the heads of Wave Bubble, versions and related work. Here I found important and complete information.
I explain my question:
I will order 4 PCB sets, and this boards are 2010 rev 2b. The overlapping traces on D4 and D5 have been fixed, the R43 resistor have been put back on, and there's a new switch.
Is the BOM shown here the correct BOM for this design/rev?
http://ladyada.net/wiki/wavebubble/wave_bubble_2010
I've read this thread http://forums.adafruit.com/viewtopic.php?f=16&t=14782 (or tried) and I didn't find anything that confirms or denies it. If the BOM I've indicated isn't the appropriate, please somebody tell me the correct way.
I await a response. Thanks!
WB2010 Rev 2B BOM
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
-
- Posts: 3
- Joined: Thu May 29, 2014 11:25 am
Re: WB2010 Rev 2B BOM
Yes, the BOM is correct:
- Attachments
-
- correct.jpg (128.32 KiB) Viewed 5066 times
Please be positive and constructive with your questions and comments.