Wiki partslist question + pics of my current build...

The operation of transmitters designed to jam or block wireless communications is a violation of the Communications Act of 1934, as amended ("Act"). See 47 U.S.C. Sections 301, 302a, 333. The Act prohibits any person from willfully or maliciously interfering with the radio communications of any station licensed or authorized under the Act or operated by the U.S. government. 47 U.S.C. Section 333. The manufacture, importation, sale or offer for sale, including advertising, of devices designed to block or jam wireless transmissions is prohibited. 47 U.S.C. Section 302a(b). Parties in violation of these provisions may be subject to the penalties set out in 47 U.S.C. Sections 501-510. Fines for a first offense can range as high as $11,000 for each violation or imprisonment for up to one year, and the device used may also be seized and forfeited to the U.S. government.

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
cmolson
 
Posts: 47
Joined: Sun Oct 28, 2007 8:22 am

Wiki partslist question + pics of my current build...

Post by cmolson »

First off, I sold some boards here a while ago and then kinda disappeared (I have no more boards left to sell).. Well I finally have the time to build this so I have ordered the parts.


I ordered everything off the wiki page parts list (well everything I thought I needed)...

I got my VCO's from minicircuits already too.

One of the parts IC6 (AD8402ARZ10) I believe there is a mistake. The part says AD8402ARZ10 but the link to digikey goes to a AD8403 not AD8402... The 3 is a 4 channel does not fit on the board obviously...

Anyways, I guess we should change that..

Also I was wondering if anyone knows what parts I should be looking at from digikey for the standoffs (to connect the boards together) as well as male/female header for the board interconnects..

Thanks!

PS: I have uploaded some pics of what I have done so far: http://flickr.com/cmolson6

Chuck
 
Posts: 55
Joined: Sun Dec 14, 2008 6:34 am

Re: Wiki partslist question + pics of my current build...

Post by Chuck »

I order standoffs from McMaster.
93505A101
ALUMINUM MALE-FEMALE THREADED HEX STANDOFF, 3/16" HEX, 1/4" LENGTH, 4-40 SCREW SIZE
91780A163
ALUMINUM FEMALE THREADED HEX STANDOFF, 1/4" HEX, 3/8" LENGTH, 4-40 SCREW SIZE


I also ordered the AD8403. OOps. Thanks for catching that.

Your work looks great, congrats.

cmolson
 
Posts: 47
Joined: Sun Oct 28, 2007 8:22 am

Re: Wiki partslist question + pics of my current build...

Post by cmolson »

Thanks!

Also I updated the wiki page to correct the error. It now shows the correct info for the AD8402ARZ10-ND.


Now I just need to figure out what to do about the SXB/SXA ...

antares
 
Posts: 29
Joined: Wed Feb 13, 2008 5:16 pm

Re: Wiki partslist question + pics of my current build...

Post by antares »

Damn, I've got the AD8403 too. Well, seems like I have to order the correct part the next time I buy from Digi-Key...

Didn't notice the mistake as I compiled my part list. That one came from the wrong product link on ladyada's make page for the A/D tuning section. Thank you for letting us know.

Locked
Please be positive and constructive with your questions and comments.

Return to “Wave Bubble”