There is no USPS pickup on Monday Feb 15th, 2016 because of President's Day. USPS orders placed after 11am EST Fri February 12th will go out Tuesday February 16. UPS orders will ship as normal.

Faulty IC1 Microcontroller
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

Faulty IC1 Microcontroller

by ElWahpo on Fri Feb 15, 2013 11:32 pm

About a year back a purchased the (red) 3 SpokePOV& USBtinyISP kit. Just lately I finally finished sodering up #1 and #2. That's when I ran into a problem.
Powered up #2 and all of the LED's lit up. I tried the reset button but no results. I powered down and inspected all soder connections, all looked o.k. When I
powered up #2 again the LED's all lit and froze but in a different pattern. To search further into the problem I tried swapping out the only things not sodered
in. Took the IC1 intended for #3 and swapped it with the IC1 in #2. Powered up and all works fine. I also tried connecting the USBtinyISP to the SpokePOV
with IC1 #2 and it was dead in the water. So I guess I need a replacement pre-programmed IC1. What do I do to get a replacement?
ElWahpo
 
Posts: 3
Joined: Fri Feb 15, 2013 10:43 pm

Re: Faulty IC1 Microcontroller

by adafruit_support_bill on Sat Feb 16, 2013 10:34 am

Did you buy these from Adafruit? We don't see you in the database.

adafruit_support_bill
 
Posts: 45739
Joined: Sat Feb 07, 2009 10:11 am

Re: Faulty IC1 Microcontroller

by ElWahpo on Sat Feb 16, 2013 3:10 pm

Now that I look at the date on the package shipped, it is 8/12/2012. Wow it sure seemed like a year ago. My wife ordered it as a BD gift for me. It
was shipped to Peoria AZ. 85381 via USPS from Adafruit Industries.
ElWahpo
 
Posts: 3
Joined: Fri Feb 15, 2013 10:43 pm

Re: Faulty IC1 Microcontroller

by adafruit_support_bill on Sat Feb 16, 2013 4:32 pm

Alright. If you contact support@adafruit.com with a link to this thread they can send you out a replacement SpokePOV processor.

adafruit_support_bill
 
Posts: 45739
Joined: Sat Feb 07, 2009 10:11 am

Re: Faulty IC1 Microcontroller

by ElWahpo on Tue Feb 19, 2013 7:19 pm

Just a note of thanks to Adafruit_support for your help and guidence in getting my IC1 problem resolved.
I just got an e-mail that a replacement IC1 has been shipped out today for my #3 SpokePOV.
ElWahpo
 
Posts: 3
Joined: Fri Feb 15, 2013 10:43 pm

Please be positive and constructive with your questions and comments.