๐Ÿ“ฃ๐Ÿ“ช ๐Ÿšš Adafruit will not be shipping USPS orders Monday January 20, 2020 ๐Ÿ—“. Expedited USPS orders placed after 11am ET ๐Ÿ•š Friday January 17 will go out Tuesday January 21 ๐Ÿ“ฃ๐Ÿ“ช๐Ÿšš
0

AVR Dragon + SpokePOV
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

AVR Dragon + SpokePOV

by haak on Wed Oct 02, 2013 5:10 pm

Could be used AVRdragon for programming SpokePOV?
haak
 
Posts: 9
Joined: Wed Oct 02, 2013 2:33 pm

Re: AVR Dragon + SpokePOV

by adafruit_support_rick on Thu Oct 03, 2013 10:14 am

You would use the SPI programming method, as documented here:
http://www.atmel.no/webdoc/avrdragon/av ... ption.html

adafruit_support_rick
 
Posts: 35095
Joined: Tue Mar 15, 2011 11:42 am
Location: Buffalo, NY

Re: AVR Dragon + SpokePOV

by haak on Thu Oct 03, 2013 11:38 am

I did it like this but spokepov.app (1.4) failed to open the port.
But with avrdude it's normaly working and I flashed spokepov.hex. and I hope with right fuses (-U lfuse:w:0x64:m -U hfuse:w:0xdf:m -U efuse:w:0xff:m0)

I'm on osx 10.8.5 but i tried also 10.6.2. Still with same result.

Could you please share with me default hex files for 2313 and eeprom? I would like to burn it all with avrdude to see if everthing is ok.
regards
haak
 
Posts: 9
Joined: Wed Oct 02, 2013 2:33 pm

Re: AVR Dragon + SpokePOV

by adafruit_support_rick on Thu Oct 03, 2013 12:48 pm

Oh - the spokePOV.app won't work with the Dragon. It's looking for a USBtinyISP.

The hex file is linked on the tutorial downloads page.
Here's the direct link:
http://www.ladyada.net/media/spokepov/s ... re1_01.zip

adafruit_support_rick
 
Posts: 35095
Joined: Tue Mar 15, 2011 11:42 am
Location: Buffalo, NY

Re: AVR Dragon + SpokePOV

by haak on Thu Oct 03, 2013 2:32 pm

and does this .hex includes also some default pictures?
kind regards
haak
 
Posts: 9
Joined: Wed Oct 02, 2013 2:33 pm

Re: AVR Dragon + SpokePOV

by adafruit_support_rick on Thu Oct 03, 2013 3:00 pm

I believe it does, yes.

adafruit_support_rick
 
Posts: 35095
Joined: Tue Mar 15, 2011 11:42 am
Location: Buffalo, NY

Re: AVR Dragon + SpokePOV

by haak on Thu Oct 03, 2013 3:19 pm

I flash it again with avrdude and those fuses (-U lfuse:w:0x64:m -U hfuse:w:0xdf:m -U efuse:w:0xff:m0)
I'm right?
haak
 
Posts: 9
Joined: Wed Oct 02, 2013 2:33 pm

Re: AVR Dragon + SpokePOV

by haak on Thu Oct 03, 2013 4:11 pm

or -U lfuse:w:0xe4:m -U hfuse:w:0x9d:m
haak
 
Posts: 9
Joined: Wed Oct 02, 2013 2:33 pm

Re: AVR Dragon + SpokePOV

by adafruit_support_rick on Thu Oct 03, 2013 4:15 pm

Where did you get those fuse values? Those aren't the ones in the makefile.
The makefile burns these fuse values: -U lfuse:w:0xe4:m -U hfuse:w:0x9d:m

Also, I looked at the source code, and it does not contain any default pictures. So the .hex file will not have pictures after all.
Sorry. :(

adafruit_support_rick
 
Posts: 35095
Joined: Tue Mar 15, 2011 11:42 am
Location: Buffalo, NY

Re: AVR Dragon + SpokePOV

by haak on Thu Oct 03, 2013 4:38 pm

thanks for fuses.
good to know, that there're no pictures in .hex

I have to build serialISP and find some old PC.
could you share with me schematic for your serial ISP dongle?
haak
 
Posts: 9
Joined: Wed Oct 02, 2013 2:33 pm

Re: AVR Dragon + SpokePOV

by adafruit_support_rick on Thu Oct 03, 2013 5:33 pm

Everything available is linked on the tutorial downloads page.

The USBtinyISP kit is only $22.

adafruit_support_rick
 
Posts: 35095
Joined: Tue Mar 15, 2011 11:42 am
Location: Buffalo, NY

Please be positive and constructive with your questions and comments.