Due to high demand expect some shipping delays at this time, orders may not ship for 1-2 business days.
0

Full Spectrum Stepping Motor Help
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

Full Spectrum Stepping Motor Help

by supergokougt on Thu Oct 06, 2016 12:22 pm

I am trying to replace a stepper motor from a Full Spectrum LASER cutter.

Any chance you can help me figure it out?

http://hybridsteppermotor.sell.everychi ... motor.html

The number on the motor is type 42BYGH108-31 CW No:2014.12.13

The above website lists it and gives more information.

Then I would like to replace the pulley to something that can be swapped since the one supplied with the machine seems to be pressed on.
Last edited by supergokougt on Thu Oct 06, 2016 1:00 pm, edited 1 time in total.
supergokougt
 
Posts: 2
Joined: Mon Nov 11, 2013 11:51 am

Re: Full Spectrum Stepping Motor Help

by adafruit_support_bill on Thu Oct 06, 2016 12:54 pm

The motor in the link looks like an exact replacement. If you don't want to order from there, you can check with Anaheim Automation to see if they have one with comparable specifications. For the pulley, Anaheim may have one. Or you can check with StockDrive or McMaster Carr. They both carry a wide range of pulleys and should have one with the appropriate tooth profile and shaft diameter for your motor.

adafruit_support_bill
 
Posts: 81062
Joined: Sat Feb 07, 2009 10:11 am

Re: Full Spectrum Stepping Motor Help

by supergokougt on Thu Oct 06, 2016 1:06 pm

Thanks. I tried that site but not sure how it is going to work out.

I send an email to Anaheim - thanks for the suggestion!
supergokougt
 
Posts: 2
Joined: Mon Nov 11, 2013 11:51 am

Please be positive and constructive with your questions and comments.