HELP! Laser Etch Gold Anodize Aluminum

Share your information, hints and discuss Laser cutters/engravers

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
gstar1988
 
Posts: 1
Joined: Thu Aug 25, 2011 1:34 am

HELP! Laser Etch Gold Anodize Aluminum

Post by gstar1988 »

i have a couple pieces getting machines and it is going to be gold anodize. Need to have black lettering that says " do not torque" how am i able to fill in the etch with black color? i have an 75 watt epilog c02 laser system. need a quick solution! i have 1 day to complete this :cry: if not i would order this http://shopping.netsuite.com/s.nl/c.646 ... tegory=245
If it etch it bare with ceramark and anodize it will it come out?


Thanks a million

User avatar
250 coupe
 
Posts: 27
Joined: Fri Jan 08, 2010 4:33 am

Re: HELP! Laser Etch Gold Anodize Aluminum

Post by 250 coupe »

I wouldn't like to test this on a keeper part but you could try running the anodized part as you normally would and then hitting it again with Cermark. I would not move the part between runs but mask the interior of the machine and spray the Cermark directly on the part or spray it into a cup and brush it on. If you have a current Epilog, I think you have the encoder strips which you need to keep free of Cermark. My machine is nearing 10 years old and does not have the strips. I have sprayed Cermark on a few parts while they where in the machine but I don't make a habit of it since it's probably very abrasive and if there is any on a lens or mirror it could destroy it.

The Thermark LMM6046 looks like it would work but based on Thermark's notes, it may have a bit of a learning curve.

Another option would be to mask the part and vector cut the text. Then you could powder coat the parts and bake them in a cheap toaster oven.

http://www.eastwood.com/hotcoat-powder-coating.html

http://www.harborfreight.com/catalogsea ... t?q=powder

I've never used a powder coating system before and don't really know if it would work but I think it would.

Michael

Locked
Please be positive and constructive with your questions and comments.

Return to “Laser”