[SOLVED] Library ST7735 NEEDS SUPPORT for 1.54" 240x240 Wide
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit2
- Posts: 22148
- Joined: Fri Mar 11, 2005 7:36 pm
Re: [SOLVED] Library ST7735 NEEDS SUPPORT for 1.54" 240x240
its the same as Molex 0528921095 but 12 pin, so maybe 0528921295
- solardude
- Posts: 145
- Joined: Fri Oct 18, 2013 12:47 am
Re: [SOLVED] Library ST7735 NEEDS SUPPORT for 1.54" 240x240
Thanks for verifying that!adafruit2 wrote:its the same as Molex 0528921095 but 12 pin, so maybe 0528921295
- solardude
- Posts: 145
- Joined: Fri Oct 18, 2013 12:47 am
Re: [SOLVED] Library ST7735 NEEDS SUPPORT for 1.54" 240x240
Is there any way I could get a schematic that shows what lines are feeding the 12 pins on this Molex connector?adafruit2 wrote:its the same as Molex 0528921095 but 12 pin, so maybe 0528921295
Or is there a link to the datasheet for the actual LCD?
Thanks!
- amcjen
- Posts: 5
- Joined: Mon Oct 17, 2011 12:00 pm
Re: [SOLVED] Library ST7735 NEEDS SUPPORT for 1.54" 240x240
I second this request--also would love to see the schematic for the 12 pin Molex connector.solardude wrote:Is there any way I could get a schematic that shows what lines are feeding the 12 pins on this Molex connector?adafruit2 wrote:its the same as Molex 0528921095 but 12 pin, so maybe 0528921295
Or is there a link to the datasheet for the actual LCD?
Thanks!
Love this display!
- aglass0fmilk
- Posts: 5
- Joined: Thu Jun 14, 2018 5:38 pm
Re: [SOLVED] Library ST7735 NEEDS SUPPORT for 1.54" 240x240
I third this. Need more information about what pins are broken out by the flex cable. Bump!amcjen wrote:I second this request--also would love to see the schematic for the 12 pin Molex connector.solardude wrote:Is there any way I could get a schematic that shows what lines are feeding the 12 pins on this Molex connector?adafruit2 wrote:its the same as Molex 0528921095 but 12 pin, so maybe 0528921295
Or is there a link to the datasheet for the actual LCD?
Thanks!
Love this display!
- solardude
- Posts: 145
- Joined: Fri Oct 18, 2013 12:47 am
Re: [SOLVED] Library ST7735 NEEDS SUPPORT for 1.54" 240x240
@Bill @Adafruit2 Can you help us with getting the schematic for this LCD screen, please?
- adafruit2
- Posts: 22148
- Joined: Fri Mar 11, 2005 7:36 pm
Re: [SOLVED] Library ST7735 NEEDS SUPPORT for 1.54" 240x240
hi we are ver busy but will post a guide soon. please check the blog and you'll see when its live!
- solardude
- Posts: 145
- Joined: Fri Oct 18, 2013 12:47 am
Re: [SOLVED] Library ST7735 NEEDS SUPPORT for 1.54" 240x240
@Adafruit2 Good to hear!
I'm about to start on the control panel for a product and need this schematic for the LCD board before I can successfully finish the board and have the PCB's ran.
I check the blog regularly so hope to see it soon.
Please don't forget!
Thanks!
I'm about to start on the control panel for a product and need this schematic for the LCD board before I can successfully finish the board and have the PCB's ran.
I check the blog regularly so hope to see it soon.
Please don't forget!
Thanks!
- toddkrein
- Posts: 34
- Joined: Wed May 05, 2010 3:17 pm
Re: Library ST7735 NOT WORKING for 1.54" 240x240 Wide Angle
fazambuja wrote:Just tried the https://github.com/espressif/WROVER_KIT_LCD library. It uses a ST7789V
It "works" but the colors are still off. Didn't try but there is support for the Backlight.
A better solution for the Wrover-Kit is:
For anyone trying to program this via the Arduino IDE (which works well, BTW), the stock adafruit LCD libraries won’t work. See https://github.com/espressif/WROVER_KIT_LCD instead. It will save you hours of frustration… (Don’t ask me how I know.)
- adafruit2
- Posts: 22148
- Joined: Fri Mar 11, 2005 7:36 pm
Re: [SOLVED] Library ST7735 NEEDS SUPPORT for 1.54" 240x240
hiya - this thread is about the 1.54" TFT - not the WROVER KIT with 2.8" TFT?
- solardude
- Posts: 145
- Joined: Fri Oct 18, 2013 12:47 am
Re: [SOLVED] Library ST7735 NEEDS SUPPORT for 1.54" 240x240
Adafruit do you have any info on when you would be able to supply a schematic for this LCD so we can use it into our projects with custom PCB?
We have been patiently waiting for many months now.
Thanks!
We have been patiently waiting for many months now.
Thanks!
- adafruit2
- Posts: 22148
- Joined: Fri Mar 11, 2005 7:36 pm
Re: [SOLVED] Library ST7735 NEEDS SUPPORT for 1.54" 240x240
hiya we put it on github in september! :)
https://github.com/adafruit/Adafruit-1. ... 40-TFT-PCB
https://github.com/adafruit/Adafruit-1. ... 40-TFT-PCB
- solardude
- Posts: 145
- Joined: Fri Oct 18, 2013 12:47 am
Re: [SOLVED] Library ST7735 NEEDS SUPPORT for 1.54" 240x240
Just now saw you added the schematic for this screen!adafruit2 wrote:hiya we put it on github in september! :)
https://github.com/adafruit/Adafruit-1. ... 40-TFT-PCB
I was looking for it on the product page the last 3 months!
Thanks for posting to let us know where to find it. I just bout a few more secreens for a prototype desig so good to know I can now make my own PCB for these.
Please be positive and constructive with your questions and comments.