5X6 Ortho NeoKey Case
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- aklitman
- Posts: 8
- Joined: Fri Nov 11, 2011 9:08 am
5X6 Ortho NeoKey Case
Wow! Just received my 5X6 NeoKey Ortho boards and they are spectacular. As I wire these up, I've been musing over an enclosure. Are there any 3D Files or plans out there I can use as a basis? If any STL files exist, I can modify them to make sure the case is deep enough for a board & battery. Speaker option too? So many possibilities.
- mikeysklar
- Posts: 13824
- Joined: Mon Aug 01, 2016 8:10 pm
Re: 5X6 Ortho NeoKey Case
The Eagle files are posted.
https://github.com/adafruit/Adafruit-Ne ... -Apart-PCB
Not STLs directly, but you can generate STLs from board file using Fusion 360.
https://blog.adafruit.com/2018/09/04/ne ... 3d-models/
Eagle is also able to "Save As" board files as STP files.
https://github.com/adafruit/Adafruit-Ne ... -Apart-PCB
Not STLs directly, but you can generate STLs from board file using Fusion 360.
https://blog.adafruit.com/2018/09/04/ne ... 3d-models/
Eagle is also able to "Save As" board files as STP files.
- aklitman
- Posts: 8
- Joined: Fri Nov 11, 2011 9:08 am
Re: 5X6 Ortho NeoKey Case
Great Reply & Thx! I watched the video. This is a cool feature. I did not know this could be done. Thx for helping my education. Now, to review my Fusion 3670 skills (I have been more of a TinkerCAD guy) and see what I can create.
- mikeysklar
- Posts: 13824
- Joined: Mon Aug 01, 2016 8:10 pm
Re: 5X6 Ortho NeoKey Case
You can use Fusion 360 to convert the Eagle BRD file to a TinkerCad friendly import format (STL).
https://www.instructables.com/Import-Mc ... Tinkercad/
https://www.instructables.com/Import-Mc ... Tinkercad/
Please be positive and constructive with your questions and comments.