SAMD09 pre-programmed purchase

Breakout boards, sensors, other Adafruit kits, etc.

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
User avatar
skuenstler
 
Posts: 8
Joined: Tue Nov 17, 2015 6:00 am

SAMD09 pre-programmed purchase

Post by skuenstler »

Hi,
is it possible to purchase pre-programmed SAMD09 boards identical to the ones built into the "NeoKey 1x4 QT I2C" board ?

If yes, what is the price, delivery-time and how do I order ?

If no, is it possible to at least get the source-code of the SMAD09 microcontroller identical to as built into the "NeoKey 1x4 QT I2C" board ?

Thank you for any help on this.

User avatar
dastels
 
Posts: 15653
Joined: Tue Oct 20, 2015 3:22 pm

Re: SAMD09 pre-programmed purchase

Post by dastels »

The code is on github: https://github.com/adafruit/Adafruit_Seesaw

You will need a jlink thingy to program the SAM9 though, e.g. https://www.adafruit.com/product/3571

Dave

User avatar
skuenstler
 
Posts: 8
Joined: Tue Nov 17, 2015 6:00 am

Re: SAMD09 pre-programmed purchase

Post by skuenstler »

Thank you Dave, which one is the SAMD09 code exactly. I only find lots of Arduino-IDE .cpp files. But which one is the SAMD09 microcontroller code that I can then burn via the J-Link ?

Thanks for a clarification.

User avatar
skuenstler
 
Posts: 8
Joined: Tue Nov 17, 2015 6:00 am

Re: SAMD09 pre-programmed purchase

Post by skuenstler »

I finally found the correct link:

https://github.com/adafruit/seesaw

Here I find the SAMD09 microcontroller Software for the several seesaw boards...

Locked
Please be positive and constructive with your questions and comments.

Return to “Other Products from Adafruit”