0

PN532 breakout board - No NFC device found
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

Re: PN532 breakout board - No NFC device found

by thomasmeier on Fri Jan 17, 2014 7:20 am

Here is a complete tutorial for PN532 breakout boards:

http://www.schnatterente.net/technik/nfc-raspberry-pi-pn532-breakout-board

It's in German language, you may use the Google translator.
thomasmeier
 
Posts: 1
Joined: Fri Jan 17, 2014 7:18 am

Re: PN532 breakout board - No NFC device found

by mjwrazor on Sat Oct 10, 2015 11:21 pm

webnology.ch wrote:Here is a small description for libnfc on ubuntu 12.04 and latest git libnfc (1.7.0)
hope it can be helpful

$ sudo apt-get install autoconf automake libtool
$ sudo apt-get install libusb-0.1-4 libusb-dev libpcsclite1 libpcsclite-dev libccid pcscd
$ sudo apt-get install git
$ sudo git clone https://code.google.com/p/libnfc/
$ cd libnfc
$ mkdir /etc/nfc
$ mkdir /etc/nfc/devices.d/
$ sudo nano /etc/nfc/devices.d/pn532_via_uart2usb.conf

paste the following 5 lines into the pn532_via_uart2usb.conf:

## Typical configuration file for PN532 board (ie. microbuilder.eu / Adafruit) device
name = "Adafruit PN532 board via UART"
connstring = pn532_uart:/dev/ttyUSB0
allow_intrusive_scan = true
log_level = 3

$ sudo autoreconf -vis
$ ./configure --prefix=/usr --with-drivers=pn532_uart --sysconfdir=/etc
$ sudo make clean
$ sudo make
$ sudo make install all

plugin ure ftdi usb

$ cd examples
$ sudo ./nfc-poll


but does this work for the raspberry pi. This says USB. this board doens connect to a usb

mjwrazor
 
Posts: 1
Joined: Sat Oct 10, 2015 11:09 pm

Please be positive and constructive with your questions and comments.


cron