FT232H Breakout board gives invalid device descriptor
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- ichaelm
- Posts: 2
- Joined: Sat Apr 30, 2016 3:28 pm
FT232H Breakout board gives invalid device descriptor
I've been trying to get this chip working, but it appears to be unusable because it has a VID of 0000 and a PID of 0002. Is it possible that the chip was bricked by a nasty FTDI driver that identified it as counterfeit? If not, what else might have happened, and is there anything I can do?
- Attachments
-
- adafruit.png (7.86 KiB) Viewed 245 times
- ichaelm
- Posts: 2
- Joined: Sat Apr 30, 2016 3:28 pm
Re: FT232H Breakout board gives invalid device descriptor
Bump, since this seems to be the only way to contact Adafruit about technical issues.
- mailhouse
- Posts: 107
- Joined: Sat Jul 25, 2015 8:06 pm
Re: FT232H Breakout board gives invalid device descriptor
consider downloading ft_prog from the ftdi web site and reassigning the corrupted variables. not sure if it will work, but hey its worth a try
- adafruit_support_mike
- Posts: 67485
- Joined: Thu Feb 11, 2010 2:51 pm
Re: FT232H Breakout board gives invalid device descriptor
Sorry for the late reply. This thread must have fallen off the radar.
How long have you had the FT232H breakout?
How long have you had the FT232H breakout?
Please be positive and constructive with your questions and comments.