Pro Trinket 3V error: Device not configured

USB AVR Programmer and SPI interface. Adafruit's USBtinyISP.

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
User avatar
elin05
 
Posts: 78
Joined: Tue Jun 11, 2013 4:27 pm

Pro Trinket 3V error: Device not configured

Post by elin05 »

I keep on receiving this error when trying to upload to my Pro Trinket 3V using USBtinyISP:

avrdude: error: usbtiny_send: Operation timed out (expected 128, got -60)
avrdude: verification error, first mismatch at byte 0x0280
0xff != 0x23
avrdude: verification error; content mismatch
avrdude: verification error; content mismatch

I have two Pro Trinket 3Vs and one Pro Trinket 5V. I only see this issue with one of my 3V boards.

I have tried reprogramming the bootloader using an Arduino UNO but that did not help - I still get the same error.

Is there anything else I can try and/or can I get my board replaced?

Locked
Please be positive and constructive with your questions and comments.

Return to “USBtinyISP”