0

USBtiny 10-pin header layout?
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

USBtiny 10-pin header layout?

by ashmon on Wed Aug 01, 2007 2:27 pm

* N00b Warning *

When using the USBtiny I am unsure as to which pins in the 10-pin header are the miso, mosi, sck, and reset pins.

I am using the ATmega8 miso, mosi, sck, reset pins are. My AVR-PG2 broke when someone rolled over it with a chair, so I built the USBtiny.

Also when providing power from the programmer what pin(s) are 5V and GND?

I would appreciate any help! Thanks!

ashmon
 
Posts: 2
Joined: Wed Aug 01, 2007 2:16 pm

by adafruit on Wed Aug 01, 2007 3:03 pm

you can look on the back of the PCB
or
look at the images here
http://www.ladyada.net/library/avrdevtu ... mming.html

adafruit
 
Posts: 12149
Joined: Thu Apr 06, 2006 4:21 pm
Location: nyc

by ashmon on Wed Aug 01, 2007 4:54 pm

I am glad to see that I was doing things correctly, unfortunately that means that something else is wrong.

Thanks a lot for the help, I guess I'm back to troubleshooting it.

ashmon
 
Posts: 2
Joined: Wed Aug 01, 2007 2:16 pm

Please be positive and constructive with your questions and comments.