Due to high demand expect some shipping delays at this time, orders may not ship for 3-4 business days.
0

RGB LCD Shield
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

RGB LCD Shield

by pkainga on Tue Nov 30, 2021 1:56 am

Hello,

I have finally built the RGB LCD Shield. Linked below.

https://learn.adafruit.com/rgb-lcd-shield

I cant find the power cable for it in the package I received, I don't know which one to get.

What power cable/supply do I need to get to get it powered?

Thank you ladies and gents!

pkainga
 
Posts: 1
Joined: Thu Feb 23, 2017 12:22 am

Re: RGB LCD Shield

by adafruit_support_bill on Tue Nov 30, 2021 6:51 am

There is no power cord for the shield. It is intended to be plugged into an Arduino and gets its power directly from the Arduino.
https://learn.adafruit.com/rgb-lcd-shie ... lcd-shield

If you want to run it detached from the Arduino, you will need to connect 4 jumper wires from the Arduino to the shield. These are not supplied in the kit.
https://learn.adafruit.com/rgb-lcd-shie ... -307081-16

adafruit_support_bill
 
Posts: 82886
Joined: Sat Feb 07, 2009 10:11 am

Please be positive and constructive with your questions and comments.